Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-26-2018, 11:49 AM
erebus erebus is offline
Senior Member
 
Join Date: May 2012
Location: Cape Cod
Posts: 428
Default Entry level-ish vinyl cutter recommendations?

Hoping to tap into the width and breadth of the hive mind here and get some recommendations on a vinyl cutter.

Want to get one for me personally but also for some use at the boatyard.
Don't really want to spend more than $500.

Just want to be able to do registrations numbers, boat names, and logo replications for when we do paint jobs.
Needs to be able to cut vinyl sturdy enough for a boat.
Probably 24" wide at the max.

Figured our knowledge base on here is so wide and deep, I might be able to get a little insight, some pointers, or a simple wave off.
Have done some research, and I used to be a graphic designer, so have no fear of the software end of this project.
Just don't know what to look for in a (cheap-ish) machine.
Also any pointers on vinyl etc. would be awesome.

Was looking at the US Cutter Titan- $395:

http://www.uscutter.com/TITAN-Vinyl-Cutter-28-53-inch

Or the more expensive Titan2 which has a servo motor as opposed to a stepper, but is much more expensive- $695:
http://www.uscutter.com/TITAN-2-Viny...-28-53-68-inch

Or maybe the GCC Expert- $495:

http://www.imprintables.com/gcc-expe...yl-cutter-3016

And the much cheaper GCC Clipper- $295:

http://www.imprintables.com/the-clip...yl-cutter-2802

Thanks guys!
__________________
Zachary

[SIGPIC][/SIGPIC]
Reply With Quote
  #2  
Old 02-27-2018, 09:13 AM
Topflitegraphics Topflitegraphics is offline
Recovered
 
Join Date: Mar 2018
Posts: 318
Default

Do yourself a favor and stay away from those Chinese POS vinyl cutters. Find a good used Graphtec, Roland or Summa. Even a 15-20 year old Graphtec will be less of a hassle than one of those. I have a sign shop and when I reopened my own business after working for someone else for a few years, I was able to get a used FC7000-100 41" Graphtec for $2500. The machine is now about 17 years old and is a work horse that never have to worry about.

I had one of those Chinese machines for about a year or so and it was so temperamental that I grew to hate it. I wasted 20-30% of the vinyl I ran through it due to tracking issues and no matter what I did, it did not get better. I replaced it with a 24" Roland that I got from a customer (who thought he would get into the sticker business until he realized that the plotter was the simplest part of the business) for about $300. That Roland served me well for about 2-3 years until I upgraded to the Graphtec.

If you have any questions, feel free to call or email me

[email protected]
561-740-9900 shop
561-302-8260 cell
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:26 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft