#1
|
|||
|
|||
Seacraft 18
Anyone nice enough to share stock picture of a 18ft? Are the deck self bailing on the 18?
|
#2
|
|||
|
|||
Quote:
This is all I have before restoration. http://www.classicseacraft.com/commu...1&d=1617644700 And after. It self bailed from the factory I'm sure, but not with the 4strokes unless you shift weight.
__________________
1975 SF18/ 2002 DF140 1972 15' MonArk/ 1972 Merc 50 http://i833.photobucket.com/albums/z...photos/SC3.jpg |
#3
|
|||
|
|||
__________________
1975 SF18/ 2002 DF140 1972 15' MonArk/ 1972 Merc 50 http://i833.photobucket.com/albums/z...photos/SC3.jpg |
#4
|
|||
|
|||
My ETEC is roughly same weight as uncleboo’s DF140. Shaved weight and shifted tank forward. I chose not to raise deck height and it self bails. Read a few 18 threads and you will get good info. You have pics?
|
#5
|
|||
|
|||
Thanks for the poc and feedback.
Unclebok.. original have a a curve fixed motorwell that you cut off correct? |
#6
|
|||
|
|||
I have a totally stock 18 with a 2009 90 HP Mercury and it self bails. It has about an 1 1/2" between the scuppers and water.
Rod
__________________
The older I get the faster I was! |
#7
|
|||
|
|||
rod
does the stock have the slope motorwell that goes over the live bait tank in the floor? |
#8
|
|||
|
|||
I have seen pictures on here of the molded splashwell if that is what you are talking about. Do a search for that or just a google search for 18 Seacraft and I bet you will see that. Mine had a glassed-in version of that when the previous owner ran scuppers through the bottom of the hull. It would fill if you stood in the corners. I tore that out and ran them out through the transom like original. I put a lot of time into restoring the gutters and reworking that detail. I pitched the inside of the motor well to eliminate standing water and will still put ping pong balls or flaps this spring.
|
#9
|
|||
|
|||
One more. Original gutter exits where circled. 9 or 10” splash board is new obviously. You can see the old holes in the outside corner. I think the splashwell part you mention was an option from the factory. Someone correct me if I am wrong.
|
#10
|
|||
|
|||
Nice boat.
Yes the splashwell. Do you raise your transom to 25in and it clears the splash board tilted up? |
Thread Tools | Search this Thread |
Display Modes | |
|
|