Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 07-05-2003, 11:23 AM
toddkp toddkp is offline
Junior Member
 
Join Date: Sep 2002
Location: block island,rhode island
Posts: 24
Default outboard tune up

i recently aquired a 115hp evinrude that has low hours and was professionally maintained except for last winter, i suspect that it wasn't winterized. any help as to how i could personally clean it up? it looks clean almost spotless but the not being winterized thing scares me a little. thanks for the help.
Reply With Quote
  #2  
Old 07-05-2003, 04:15 PM
TUGBOAT TUGBOAT is offline
Senior Member
 
Join Date: Sep 2002
Location: Homestead~Now-Melbourne Fl.
Posts: 1,052
Default Re: outboard tune up

And don't forget the Water Pump !
Scream'n Reels'
I had to move My Ice Chest forward last Winter to Keep My engine from getting to cold !! [img]images/icons/cool.gif[/img]
__________________
http://www.frenzie.com/frenzielogoline.GIF

www.frenzie.com

http://www.frenzie.com/custom.htm
"Classic SeaCraft" Lures


1983_seacraft_master_angler.]htm



My wife and I had words,
But I didn't get to use mine."?"


Reply With Quote
  #3  
Old 07-05-2003, 09:09 PM
toddkp toddkp is offline
Junior Member
 
Join Date: Sep 2002
Location: block island,rhode island
Posts: 24
Default Re: outboard tune up

thanks for the help, i appreciate it. figured i'd ask around before messing with it.
john r- don't forget about the BI tourney, and tell a few if you think of it, should be quite fun if the size of bass right now is of any indication...
Reply With Quote
  #4  
Old 07-05-2003, 11:31 PM
SECF3114M73J SECF3114M73J is offline
Senior Member
 
Join Date: Nov 2002
Location: mystic,ct.
Posts: 188
Default Re: outboard tune up

Pull the spark plugs and squirt some oil,WD 40, or the like into each cylinder. Crank the motor a few times with the plugs out.Put new plugs in. Hook it up to a hose using muffs. Give it some fresh gas and oil and light it off. If everything works O.K. change the lower unit grease,do the general lube,and you're good to go.
Reply With Quote
  #5  
Old 07-05-2003, 11:57 PM
BARNABY55 BARNABY55 is offline
Senior Member
 
Join Date: Jun 2003
Location: tampa, florida
Posts: 167
Default Re: outboard tune up

No Waterpump impeller SECF? Get a membership to Seatow
__________________
Ted
Reply With Quote
  #6  
Old 07-06-2003, 12:12 AM
SECF3114M73J SECF3114M73J is offline
Senior Member
 
Join Date: Nov 2002
Location: mystic,ct.
Posts: 188
Default Re: outboard tune up

Barnaby, that's why I said run it on the muffs,if it ain't broke don't fix it.
Reply With Quote
  #7  
Old 07-06-2003, 01:06 AM
BARNABY55 BARNABY55 is offline
Senior Member
 
Join Date: Jun 2003
Location: tampa, florida
Posts: 167
Default Re: outboard tune up

I too had a 115 that sat for probably longer than yours. If you have fears, I would take it to someone you trust ( if there is such an animal) and spend the fee for a complete check. I did and it was the best $65.00 I spent. At least now I know what I have. Just so you know, I needed carbs rebuilt due to sitting and a stator.
__________________
Ted
Reply With Quote
  #8  
Old 07-06-2003, 01:09 AM
John R John R is offline
Senior Member
 
Join Date: Feb 2002
Location: Narragansett Bay
Posts: 1,374
Default Re: outboard tune up

Todd - there is nothing to really winterize, it's a 2 stroke and doesn't / shouldn't hold any fluids to freze and crack - even with last years weather... Should still go and lube up everything and then some but unlike a closed cooling 4 stroke, there are no cooling sections to anti-freeze. Might need the carbs cleaned or tuned...
__________________
Surf and Boat fishing for
Striped Bass

http://striped-bass.com/images/sb_small180b.gif
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:46 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft