Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 06-28-2011, 07:20 PM
basswacker basswacker is offline
Senior Member
 
Join Date: Oct 2010
Location: Carver MA
Posts: 120
Default where to put washdown pump?

Where have you put your raw water washdown pump I need ideas. (pics appreciated) where do you have it suck up from the bottom or from transom?
Thanks
__________________
Mmfishinglures.com
1976 23' Scepter
Lift weights get dates
Reply With Quote
  #2  
Old 06-28-2011, 08:42 PM
Wildman Wildman is offline
Senior Member
 
Join Date: Jul 2010
Location: Eastham MA
Posts: 409
Default Re: where to put washdown pump?

Check out the Rule Tournament series pumps, they mount directly on a seacock, and have a port for a wash down. The port is 'non powered', you will still need a washdown pump (or kit). Then you can mount your wash down pump anywhere, above or below deck. I am tucking mine under the transom cap so I can rinse it off with fresh water once in a while.
__________________
Patrick from WAY out on cape cod.
1973 23foot Center console, Birdsall Ttop, Hermco Bracket... in progress
Reply With Quote
  #3  
Old 06-29-2011, 10:50 AM
bigeasy1 bigeasy1 is offline
Senior Member
 
Join Date: Jul 2006
Location: western massachusetts
Posts: 1,048
Default Re: where to put washdown pump?

On my Tsunami,I mounted the washdown pump on the starboard side on the transom in a vertical position,just above the seacock.I used a Jabsco pump.
It works great where it is and is easily accessable for any reason through a hinged access panel on the inner liner.I's also easy to drain it in the winter,just pop a hose off and let it drain any water into the bilge.





__________________
All this,just for a boat ride
Reply With Quote
  #4  
Old 06-29-2011, 02:52 PM
bilgerat bilgerat is offline
Senior Member
 
Join Date: May 2010
Location: Buford Ga
Posts: 345
Default Re: where to put washdown pump?

I mounted mine under the front v-birth on My seafari, I used the hole from the old pottie discharge for the bronze thru hull
__________________
1973 20' seafari ob "old Yeller" sold
1972 25' seafari W/ 150 mercs {under renovation}
Reply With Quote
  #5  
Old 06-30-2011, 05:49 PM
mitchman mitchman is offline
Member
 
Join Date: Oct 2009
Posts: 66
Default Re: where to put washdown pump?

I have a 1969 20ft SF and mounted mine on the inside of the molded rear seats. Previous owner mounted it on the transom, but that didn't hold up very long.
Reply With Quote
  #6  
Old 07-05-2011, 08:18 PM
2182 2182 is offline
Senior Member
 
Join Date: Jul 2008
Location: charleston, SC
Posts: 209
Default Re: where to put washdown pump?

ive got mine on the inside transom wall, port side. trim tab motor is on the starboard side. i mounted rod holders vertically on both sides and the hose conveniently sits in the rod holder while its not being used. i share one pump for livewell and raw water, which has obvious drawbacks, but i make it work. for what its worth, snapped the cheap plastic quick connect fitting last summer and spent two miserable months looking for it online before redoing it using quality brass attachments. 2 morals: it sucks not having raw water and dont use quick connect plastic fittings on a boat. pm me if you want me to email pics...
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:56 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft