Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-04-2017, 03:57 PM
Oldboat Oldboat is offline
Recovered
 
Join Date: Jan 2017
Posts: 206
Default 2005 20 seacraft

looking at a 2005 20 seacraft for my brother in law. Can any one give me info they may have on this boat including the material is in transome. Boat is all original with 150 merc and 360 total hours both hull and motor. Been on a lift it whole life in fort Meyers . we will be repowering with a new motor if we buy it. Thx Keith
Reply With Quote
  #2  
Old 01-05-2017, 12:57 AM
bj bj is offline
Member
 
Join Date: Feb 2003
Location: North Carolina
Posts: 74
Default

These two pics are directly from a 2005 Seacraft brochure. Hopefully this will give you some good info.
Attached Images
  
Reply With Quote
  #3  
Old 01-05-2017, 09:18 AM
Oldboat Oldboat is offline
Recovered
 
Join Date: Jan 2017
Posts: 206
Default 2005 seacraft 20

Thx. something that concerns me is that I dont see a removable floorboard over tank location. i inspect my tank every year on my 23 and what if you need to replace tank do you have to cut deck?
Reply With Quote
  #4  
Old 01-05-2017, 08:33 PM
htillman htillman is offline
Senior Member
 
Join Date: Oct 2007
Location: houston, tx
Posts: 517
Default

Yes you will have to cut the deck. Good thing is the deck is "flat" - no step up and no other deck openings. You can see the tank via the rear starboard hatch - not very good view but you can see under the deck.
Mine is a 2003 powered by a 150 etec. Not a lot of storage but a nice little rig
Reply With Quote
  #5  
Old 01-05-2017, 09:20 PM
Oldboat Oldboat is offline
Recovered
 
Join Date: Jan 2017
Posts: 206
Default 2005 seacraft

Thx for a info. Have you had to change your tank?
Reply With Quote
  #6  
Old 01-08-2017, 03:51 PM
Joe R Joe R is offline
Senior Member
 
Join Date: Jun 2003
Location: Smithville NJ
Posts: 390
Default

Welcome...another Tracker owner..

Joe R.
21 SeaCraft ,1998 /200 Optimax
Susie 2
__________________
Joe R
Reply With Quote
  #7  
Old 01-09-2017, 12:45 AM
htillman htillman is offline
Senior Member
 
Join Date: Oct 2007
Location: houston, tx
Posts: 517
Default

No but I keep my eye on it. The deck would have to be cut to remove it...
Reply With Quote
  #8  
Old 01-09-2017, 08:26 AM
Oldboat Oldboat is offline
Recovered
 
Join Date: Jan 2017
Posts: 206
Default 2005 seacraft

Has anyone who has replaced the tank on the newer seacrafts modified the cutout piece to be braced screwed and caulked so as to be removable like my 23 potter for future inspection,maintenance or tank replacment?
Reply With Quote
  #9  
Old 01-10-2017, 01:35 PM
Joe R Joe R is offline
Senior Member
 
Join Date: Jun 2003
Location: Smithville NJ
Posts: 390
Default

Replaced mine on my 21 ...1998 Tracker..had it done at a shop here...was 95 gals...on mine they had to de rig everything at the console unbolt the t top from the deck along with the console, lift the console and t top off the boat ...cut around the outline along the floor. pull the section of floor and then pull the tank out....replaced with Molar plastic tank, and ran a 2x4 frame around the opening ,rested the cut out floor on the 2x4 and screwed down ...5200 the seam...after the console , leaning post and front cooler seat was put back on very little seam is visable....cutting a nice clean line is the ticket.

Joe R.
21 SeaCraft 1998 Tracker / 200 Optimax
Susie 2
__________________
Joe R
Reply With Quote
  #10  
Old 01-10-2017, 01:49 PM
Oldboat Oldboat is offline
Recovered
 
Join Date: Jan 2017
Posts: 206
Default 2005 20 seacraft

Thx Joe I figured consale had to come out. We are going over to look at boat and hopefully buy this weekend. Good news is tank is fine for now but the day will come and I thank all for help. The only thing I would do different is I would go with metal or aluminum tank. Keith
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:45 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft