Blue Prints for 23 SC Super Fisherman Outboard?

[Squacha]

Not sure if this question has been asked, if so please let me know which thread. Thx.

-Do Blue Prints for the 23 SC SuperFisherman Outboard version exist anywhere?

Was curious to know if maybe Sailfish boats bought/owned the original hull design? Or if its possible to buy copies of them?

Thanks

[rcnight]

You might try the Patent Office. I once built a copy of some Bose 901 speakers that way. Good luck.

[FLexpat]

I made a 3D CAD model of my Sceptre that I use for my rebuild - the hull is the same as the SF but I never modeled the SF. The hull model is not perfect but it is close - I used SolidWorks.

[wl3solutions]

If anyone is interested I own a 3-D measurement company and specialize in laser scanning and 3-D modeling. We do a lot of recreational boats. I do not mind assisting in documenting Seacraft models. Plan to do my 23 CC inboard this winter.

[FLexpat]

Originally Posted by wl3solutions

If anyone is interested I own a 3-D measurement company and specialize in laser scanning and 3-D modeling. We do a lot of recreational boats. I do not mind assisting in documenting Seacraft models. Plan to do my 23 CC inboard this winter.

I would love to have a copy of that scan!!!

[Locke N Load]

Originally Posted by wl3solutions

If anyone is interested I own a 3-D measurement company and specialize in laser scanning and 3-D modeling. We do a lot of recreational boats. I do not mind assisting in documenting Seacraft models. Plan to do my 23 CC inboard this winter.

After scanning can you scale it up 12.5% or so?

How cool would it be to build a 26/27 SeaCraft with a beam of 9'!

[wl3solutions]

We routinely scan vessels and then apply a scale factor. Sometimes it is a variable scale in the length and beam to get exactly the desired proportions.

I’m about to scan my stern and layout where my thru transom scuppers will exit. I’ll share the scans and our output.

I would love to have my inboard as a 26 with an extra foot of beam.

[Trayder]

Originally Posted by wl3solutions

I would love to have my inboard as a 26 with an extra foot of beam.

Look for a Cape Cod 26 (Later Albin 26) as that is what they are

[NoBones]

Originally Posted by Locke N Load

How cool would it be to build a 26/27 SeaCraft with a beam of 9'!

My 1968 Seamaster 27 has a 9'10" beam !!!

[flyingfrizzle]

Originally Posted by NoBones

My 1968 Seamaster 27 has a 9'10" beam !!!

The SeaCraft Seamaster 27 is one big 27, pictures don't do it justice.