|
|
#11
12-30-2003, 10:08 AM
|
|||
|
|||
Re: Paint ques.
Scott is right on the mark... the Lemon Mist offered by Sterling is the closest to the original Potter era "yellow" gelcoat color. I know because I spent 3 months searching for a color that would be as close to the original as possible. After many test samples and mucho $$$, this was BY FAR the closest color match I found. I painted my 20 Sceptre in this color using Awlgrip paint - sprayed on. I then added the standard 1.5" inch wide single black boot stripe (3/4" above the chine edge) which was typically installed on yellow 20 footers back then. FYI: no one makes an 1.5" wide boot stripe vinyl tape, so I had my local sign shop fabricate and install it. Turned out perfect.
|
|
#12
12-30-2003, 06:38 PM
|
||||
|
||||
|
Re: Paint ques.
Hey Mark
Mine started out that way until I was called "Bananna Boat" too many times [img]images/icons/grin.gif[/img] I corrected the problem real quick!---> http://www.theboatzone.com/gallery/CSteele/res8246 Used Signature Finish, no primer, no spray, easy to repair [img]images/icons/cool.gif[/img]
__________________
   1978 23' Superfish/Potter Bracket 250HP -------- as "Americans" you have the right to ...... "LIFE, LIBERTY and the PURSUIT of a Classic SeaCraft" -capt_chuck
|
 |
|
|
Linear Mode
