Replacement items

[nolefan2]

Fellow-Ship,
Those are 60 Deg pieces im looking to use. But they don't make a "T" piece for the center of the bow. I may leave it out completly. Has anyone seen one in ther searches?. I may call Taco and ask if they make them.

[NoBones]

nolefan2, Fellowship (Ken) hit the nail on the head.
I used the same SS stantions, Bend your own pipe.
I used a standard pipe bender tool for 3/4 inch pipe.
I bought the pipe at a surplus place. If I recall,
it cost about $195 for both rails and all stantions and end
pieces. http://www.surplusunlimited.com/
Good Luck, See ya, Ken

[Capt Chuck]

Those are 60 Deg pieces im looking to use. But they don't make a "T" piece for the center of the bow. I may leave it out completly.

Mine came from the factory without a center piece. The rail uses those same stantions. The bow rail is in 3 pieces. The splits are at each side half way in the stantion

[NoBones]

I think there is a spot on the hatch, Nah it can't be.
It must be a finger print on my flat screen.
Chuck, way to clean, you make the rest of us look bad.
See ya, Ken

[Capt Chuck]

I think there is a spot on the hatch, Nah it can't be.
It must be a finger print on my flat screen.
Chuck, way to clean, you make the rest of us look bad.

[nolefan2]

I think im going to go with the Taco pieces and leave the bow T out. Capt Chuck, what color White Awgrip did you use? it looks sweet.

[FELLOW-SHIP]

Actually all that blood on the deck of Capt Chuck’s boat is what his boat looked like AFTER someone stepped onto his deck with black soled shoes and scuffed it up a bit in two places.

FellowShip

_______________________________________________

My motto: Just for the Grins