Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #11  
Old 07-14-2018, 11:46 AM
Oldboat Oldboat is offline
Recovered
 
Join Date: Jan 2017
Posts: 206
Default Drains

Pics. Still more 1708 to be added to bulkhead
Attached Images
   
Reply With Quote
  #12  
Old 07-14-2018, 11:54 AM
Oldboat Oldboat is offline
Recovered
 
Join Date: Jan 2017
Posts: 206
Default Drains

As far as tank area I have run a 1/2 coosa board on top of keel stringer the full length of stringers and put an additional one under the 85 inch’s of tank. This will give@ 1/2 step down to drain if water ever gets in there and also bulked up to 1 inch under the tank itself. There will be drain hole to rear the f tank past the small step down. Hope this helps u to understand my plan
Reply With Quote
  #13  
Old 07-14-2018, 12:01 PM
Oldboat Oldboat is offline
Recovered
 
Join Date: Jan 2017
Posts: 206
Default 23 seacraft

Other thing that helped me was I made my tank lower and longer witch gives me 3 inch between new deck and tank so I run additional wire chase strait back. My brother in law did not do this and he had clearance issues for the deck. Plus a littler thinner on tank for the stringer boxes are not strait so no clearance issue, for me it was a good place to pay attention and tank fits perfect
Reply With Quote
  #14  
Old 07-19-2018, 10:34 PM
RoomToMove RoomToMove is offline
Recovered
 
Join Date: Aug 2016
Posts: 37
Default

Thanks for the reply. Also plan on leaving 3 inch gap between deck and tank. Still thinking about the flow of water..
Reply With Quote
  #15  
Old 07-20-2018, 09:50 AM
Capt Chuck's Avatar
Capt Chuck Capt Chuck is offline
gucci
 
Join Date: Aug 2003
Location: Sailfish Capital, fla
Posts: 2,804
Default

I would consider sleeving the drain line running the length of the bilge in PVC just in case you had to replace it in the future.
__________________


1978 23' Superfish/Potter Bracket 250HP --------



as "Americans" you have the right to ......
"LIFE, LIBERTY and the PURSUIT of a Classic SeaCraft" -capt_chuck
Reply With Quote
  #16  
Old 07-20-2018, 10:44 AM
Oldboat Oldboat is offline
Recovered
 
Join Date: Jan 2017
Posts: 206
Default Drain

Capt Chuck makes a good point. When I took my step/fish box out there was a pocket of about 2 gallons of water that the foam was blocking from draining, it was nasty black water. The other thing I found is when the last tank was foam in foam got past tank board support and was blocking water from draininin properly along keel. I think at this point I’m going to just put a drain in out the bottom front of anchor box were door use to be since it will be above deck since I took step out . I am taking door out for anchor locker and moving it on top of deck as others have done. This will make it possible to when I rinse anchor locker to have water run out on deck no worry about issues down the road. I will create channel still in bow along keel so water will drain don’t won’t not xtra weight and lot water back in there. Will post pics when done
Reply With Quote
  #17  
Old 07-22-2018, 06:48 PM
Oldboat Oldboat is offline
Recovered
 
Join Date: Jan 2017
Posts: 206
Default Few more pics

Heading to the keys for 2 weeks of work so did a few things this weekend. That is my 12 year old rabbit that stays under boat all day when I’m working
Attached Images
    
Reply With Quote
  #18  
Old 07-22-2018, 07:04 PM
Oldboat Oldboat is offline
Recovered
 
Join Date: Jan 2017
Posts: 206
Default Pics

Bait well drain
Attached Images
 
Reply With Quote
  #19  
Old 07-24-2018, 10:46 AM
Surfnski Surfnski is offline
Member
 
Join Date: Jul 2009
Location: Virginia Beach, VA
Posts: 91
Default

What weight coosa are you building with? Bluewater 20 or 26 or a mix of both? I’m assuming you would have used 26 for the transom but was curious what you’re using for the other panels.
Reply With Quote
  #20  
Old 08-09-2018, 08:27 AM
Oldboat Oldboat is offline
Recovered
 
Join Date: Jan 2017
Posts: 206
Default Coosa 26

Coosa 26. The transom is 2 pieces of 1 1/2 bonded together .decks 1 inch
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:47 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft