Seacraft 18

[steel686]

Thank you. Transom was raised to 26.5” and I will measure the splash board. Had to guess a little and was happy I didn’t need to cut it after glass/fairing/paint. Probably could have gone higher but need to see how cables and harness land when tilted.

[uncleboo]

You mean one of these?

http://www.classicseacraft.com/commu...1&d=1617725995

[otterhound]

Originally Posted by edloh

rod

does the stock have the slope motorwell that goes over the live bait tank in the floor?

Yes it does but I took it out and just made some simple Starboard slats for it instead. I can remove one when I tilt the motor up. It really frees up a lot of room in back of the seat.
Rod

[edloh]

yes that splash well. i think the way to go is to raise the transom and get rid of the factory splash well just like steel686 and others have done

[uncleboo]

Haven't seen one with the factory splash well in place in awhile.

[jorgeinmiami]

Originally Posted by uncleboo

Haven't seen one with the factory splash well in place in awhile.

I have a factory splash well for my 20 MA