New Louvered Cabin Doors for Sale - Maybe.

[77SceptreOB]

25 SeaFari door, based on 21" x 52" single door (Appr measurements):

32 louver panels design(1/4" x 1.5" x 17" on 1-1/4" spacing)
70 Degree angle w/ 3/16" overlap

2-1/2" wide .250" router slotted rails both sides. 13/16" thick finished stock

Dove-tail joint mech. fastened center pieces as req-d. Appr 5" header & 10" footer.

You supply and you install the hardware.

Price is $435

Jim

[Blue_Heron]

Price is $435

Thanks, Jim, seems reasonable for custom work. I'm just starting on the restoration, so I'm not ready to pull the trigger yet. I'll get back in touch when I'm farther along and see if you're still up for it.
Dave

[77SceptreOB]

Update on the Cabin Doors:

I've picked up some local teak cabin door work. I've also bought ALL the Teak wood from my local supplier. The teak is genuine burmese teak. The picture at the begining of the thread is Burmese Teak. I bought my suppliers remaining 28 board feet at $ 11/bf, which is an awesome deal! My current project commitments will probably exhaust this teak supply.

The bad news: My supplier is getting out of the teak wood part of the business. That is why I bought all he had at a "close out" price. I can get teak from another somewhat local supplier, but at a much more expensive price. $21/bf for "Burmese" Teak. Ouch! Another option is African Teak (Iroko), it runs about $11/bf and has a lot of the same wood charactoristics as burmese teak.

So for the near future I will be busy with the projects that I have already committed to. After that, I'll see where things are with regard to Teak prices and my workload both at real work and at home.

For a comparison of "African" Teak vs. "Burmese" Teak, see the below link:

http://www.classicseacraft.com/commu...hlight=african

[77SceptreOB]

I have (1) Louvered Cabin door for a Sceptre or Savage "In Stock" at a Special price of $365. This is $100 off the normal price.
First one gets it. These are custom made and very limited production. See the below picture. Thanks, Jim

[floorboy]

[77SceptreOB]

Huh?? What does that mean?

[floorboy]

I scraped and glued and sanded on mine for a full weekend to get them looking decent...... that said, I doubt the glue will stay together, never does.

If your not in a big hurry (2-3 weeks) I will take them. I need to get out of this monster house I am working in now though.


JUST WHEN i THOUGHT i WAS DONE SPENDING MONEY ON THIS BOAT FOR THE YEAR!!!!!!!!!!!!!!!!!!!!!!!

[77SceptreOB]

A couple of pics showing how it's constructed. (Dove-tail Joints) just like the originals.

[Bushwacker]

My door has cracked thru at the bottom of the dovetails on both sides at top and bottom. I glued the cracked pieces with epoxy, but also installed a couple of 3.5" SS screws at 4 locations from the sides and covered with teak plugs. Seems to be holding up ok so far.

[Blue_Heron]

I have (1) Louvered Cabin door for a Sceptre or Savage "In Stock" at a Special price of $365. This is $100 off the normal price.
First one gets it. These are custom made and very limited production. See the below picture. Thanks, Jim

Jim,
What are the overall dimensions of the door?
Dave