Custom 25 CC - Shine

[bumpdraft]

That's a fine looking boat. After its done,you need another project, I have one you can re-do. Ron.
(haha)

[gofastsandman]

Shine indeed.

[shine]

You missed a spot!

I actually did. Im going to give it another coat next week. I was trying to do it on one coat, but it needs two. Unfortunately for me, that means one more sanding.

I have one you can re-do. Ron.

haha, I will paint it for you if you want

Shine indeed.

[bumpdraft]

[shine]

roll over cradle is finished, now just have to roll it outside and get a piece of equipment to pick and roll. *

[shine]

A few pictures of the flip. *Have a short video on another phone. * The google gallery for this build has all the pictures. *

Rolled it over almost all the way. removed casters from top and relocated them to the bottom before setting it all the way down. *Spun the hull around and rolled it back in the shop (bow first)

[shine]

starting the interior glassing...

Started glassing. *

[Terry England]

Joel, How many times do we say - "Use the right tool for the job!"
You don't use an excavator for a crane! - well, unless it's a lot cheaper! (Remember, we're all a lot like Don V. - the cheap Bas#@&d)

PS - The boat looks cool

[shine]

Originally Posted by Terry England

Joel, How many times do we say - "Use the right tool for the job!"
You don't use an excavator for a crane! - well, unless it's a lot cheaper! (Remember, we're all a lot like Don V. - the cheap Bas#@&d)

PS - The boat looks cool

Haha, well the crane rental place would not even return my calls, and the digger was free That thing had an extendable arm that reaches well over 16', could probably roll over a boat twice the size. "turned" out to be the perfect tool for turning

[DonV]

"and the digger was free"

As T-3 would say...."free is for me and that makes it the right tool"