Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #21  
Old 08-03-2017, 10:03 AM
Billybob Billybob is offline
Senior Member
 
Join Date: Feb 2002
Location: watertown ct.
Posts: 377
Default

A big wave over the bow?
Look, you got the floor up, you would have to be nutz to drain to the bilge.
Raise the floor and go out the back.
Have you searched here, it's been done and done.
Reply With Quote
  #22  
Old 08-03-2017, 10:04 AM
Capt Chuck's Avatar
Capt Chuck Capt Chuck is offline
gucci
 
Join Date: Aug 2003
Location: Sailfish Capital, fla
Posts: 2,804
Default

NO NO BILGE !!!!
Out the transom is the trick. Go to the search function
Many threads coupled with photos for your reading pleasure on this topic. Be sure to read the " Vortex" solution.
__________________


1978 23' Superfish/Potter Bracket 250HP --------



as "Americans" you have the right to ......
"LIFE, LIBERTY and the PURSUIT of a Classic SeaCraft" -capt_chuck
Reply With Quote
  #23  
Old 08-03-2017, 08:37 PM
NoBones NoBones is offline
Pooh Bah
 
Join Date: Apr 2004
Location: Area 442 Somewhere in Florida
Posts: 3,699
Default

Sorry boys......
Not backing down on this one !
You can not fix STUPID...
__________________
See ya, Ken ©
Reply With Quote
  #24  
Old 08-04-2017, 12:11 AM
Will Work For Boats Will Work For Boats is offline
Recovered
 
Join Date: Jul 2017
Posts: 13
Default

Quote:
Originally Posted by NoBones View Post
Sorry boys......
Not backing down on this one !
You can not fix STUPID...
go be an ass somewhere else.
Reply With Quote
  #25  
Old 08-04-2017, 12:18 AM
Will Work For Boats Will Work For Boats is offline
Recovered
 
Join Date: Jul 2017
Posts: 13
Default

Quote:
Originally Posted by Capt Chuck View Post
NO NO BILGE !!!!
Out the transom is the trick. Go to the search function
Many threads coupled with photos for your reading pleasure on this topic. Be sure to read the " Vortex" solution.
I will check it out. I was planning on raising the floor as it was recommended by many others in the begining of the thread. Lake Erie gets ruff very fast so to take on water here and there is a given. My 16 ft boat gets drenched a good amount and it's pumped out by the bilge. Our waters are a different animal than the ocean. 2 years ago we were fishing about 12 mi out and 18 over west what started as 1.5 ft seas ended ruffly 3 hours later as 13ft seas due a storm building as it came across the lake. I do appreciate your guys time and input. Thanks
Reply With Quote
  #26  
Old 08-04-2017, 10:00 AM
otterhound otterhound is offline
Senior Member
 
Join Date: Oct 2011
Location: Shelter Island, NY
Posts: 242
Default

Maybe just think about when the bilge pump fails as they all do at some point. You need to get the water overboard, not in the bilge.
Rod
__________________
The older I get the faster I was!
Reply With Quote
  #27  
Old 08-04-2017, 12:42 PM
FLexpat FLexpat is offline
Recovered
 
Join Date: Jan 2014
Posts: 669
Default

Quote:
Originally Posted by otterhound View Post
Maybe just think about when the bilge pump fails as they all do at some point. You need to get the water overboard, not in the bilge.
Rod
X2 on this and Capt. Chuck's post.
I got my 20 Bertram because the PO set it up for draining into the bilge and sank it at the dock when he had a failure. Bilge pumps and float switches are notoriously failure prone (and batteries often die). A self-bailing cockpit bypasses a huge part of this problem by keeping a whole lot of water out of the bilge; water in the bilge then becomes the red-flag it should be rather than a commonplace thing. Personally, I hate the idea of NOT having a self bailing cockpit.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:54 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft