Bottoms Up 23 Build

[Kraken]

Getting rid of the t-top, console, and leaning post. Will be replacing them with new ones in interest of saving time. Here are some picks of the old ones if anyone is interested. The top needs some welds repaired. I filled the holes in the console and it will need fared and painted. I have all the console parts.

[hobiekanobie]

Kraken,
I might be interested in your console etc if it will fit in my 20 without too much effort - do you have rough diamensions? Please PM me....

[castnetcracker]

Originally Posted by Kraken

Getting rid of the t-top, console, and leaning post. Will be replacing them with new ones in interest of saving time. Here are some picks of the old ones if anyone is interested. The top needs some welds repaired. I filled the holes in the console and it will need fared and painted. I have all the console parts.

Pm Sent. I'm getting started on a 23 project i could use some of those parts for.

[travisrandall]

I need to put in new console in my 23 as well. What did you find to replace it? Do you know dimensions of yours?

[Kraken]

Here is console hardtop and leaning post I found. Needs upholstery and the top needs the aluminum welded up. Any know someone the can do the aluminum support for the hardtop near Cape Canaveral

[Kraken]

Molding up the deck this weekend. Using coosa blue water 15.

[CaptLloyd]

Sunshine Welding at the Port made the top on my 23. They have also made fuel tanks for me. No complaints.

[Kraken]

Thanks I’ll run up to the port tomorrow

[Kraken]

I popped the deck off the mold. Came out pretty good. Should have gotten the seams tighter on the melanin panels. There are small areas the will need touch up. All the gutters came out good. Will get it trimmed up tomorrow and test fit. I will put it aside and finish bonding in the transom.

[Kraken]

Just need to finish up the bilge before I can bond it down