|
|
#1
06-14-2005, 02:37 PM
|
|||
|
|||
Foam in stringers
Hi CSC's, I recently aquired a '75 20cc and was cleaning it out this weekend and I noticed that the stringers are filled with a yellowish foam. Did these boats come with the foam factory installed or were the stringers originally wood? Also, I notice that some sections of the stringers have water. Anyone recomend any techniques to get the water out besides taking apart the whole boat?
__________________
1973 20' cc ---"A work in progress" 
|
|
#2
06-14-2005, 04:03 PM
|
|||
|
|||
|
Re: Foam in stringers
My 1969 20 has hollow fiberglass stringers as I think most older seacrafts have, my stringers have drain holes near the transom...jack the nose of the boat up and the water runs to the back and into the bilge.
__________________
Moesly 1969 20 CC & Potter 1978 23 CC (23 in storage awaiting rebuild)
|
|
#3
06-14-2005, 04:14 PM
|
|||
|
|||
|
Re: Foam in stringers
When I re did my boat it was out of the water for 1 year. During that time I drilled some holes in the stringers in arrears that I thought might have some water in them and before I closed up the bottom of the boat I filled in the holes with epoxy. I did get a little water out of one of the holes I drilled the holes just incase. As for the foam I think all Potters and beyond had foam filled stringers in them.
FellowShip [img]/images/graemlins/cool.gif[/img]
|
 |
|
|
Linear Mode
