Leaning post for 23' I/O

[trex]

Does anyone have any ideas for a leaning post for a 23 I/O? Seems like I'm having a hard time finding something that will fit so that I can still get to the engine. Thanks in advance

[oldfielder]

I took my seats out and was originally looking at the birdsall mini, but I was too cheap, so I kept looking and I found a guy selling one off of a small angler cc because his g/f wanted seats(sucker).
It is the perfect fit-I was actually able to thru-bolt it to the gas tank hatch, as the feet are the exact same width.
My advice-Play around with it before you bolt it down. I have pretty big feet so I definitely needed room between the console and the post-nothing more annoying than bumping into stuff on your boat every time you try to move somewhere.
And remember, there are ways to get creative with the engine hatch hinges to give you more leeway. I have seen them on the sides and I have the ones that are pegged so I can remove the whole hatch to work on the motor.

[trex]

Very good point, I didn't even think of latching from the sides! Thanks alot!

[oldfielder]

I'll try to take a pic of my set-up with distances just so you can get an idea.
A lot of guys don't like the i/o because of the engine box, but my buddy and I always use it as a casting platform when we are fishing light tackle, so two guys can both be up high and out of each other's way.

[trex]

Certainly would appreciate that! Thanks alot!