Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 06-14-2011, 06:35 PM
Yz2009 Yz2009 is offline
Member
 
Join Date: Aug 2010
Posts: 61
Default do i need a new fuel tank

Ive got a 1987 seacraft 20SF. I have been having fuel starvation issues. It has a new fuel filter, and lines. I think the pickup is fouled inside of the tank and i cant remove the pickups to clean or check it. There is lots of sediment in the bottom if the fuel filter bowl and the fuel is always a dirty brownish color.

To my knowledge the tank is in good shape (but its 24 years old), its just really dirty. Is it time for a new tank?
Reply With Quote
  #2  
Old 06-14-2011, 09:48 PM
newboater newboater is offline
Member
 
Join Date: Jun 2004
Location: Egg Harbor Township, NJ.
Posts: 43
Default Re: do i need a new fuel tank

if you have a lot of sediment, and fuel is dirty brown, inlet most likely clogs when pump is sucking, then will move clear for a while when shut off, it needs to be removed, checked and cleaned, may be easier to replace, about to do the same, also have dirty brown fuel, (rust & varnish )
__________________
Frank 1972 20' Seafari
Reply With Quote
  #3  
Old 06-15-2011, 01:19 PM
tgilchrist01 tgilchrist01 is offline
Junior Member
 
Join Date: Dec 2008
Location: Snug Harbor RI
Posts: 27
Default Re: do i need a new fuel tank

I replaced the fuel tank on my 1988 23 CC this winter. I had dirt and surface corrosion around the sending unit where I could see the tank. I wanted to redo the console this past winter and thought it would be best to replace the tank while I had the console out of the boat. I'm glad I did. On the botton side of the tank there was a corrion cell that had eaten more than half the the wall thickness away.
On the replacement tank I put the fill elbow, sending unit and pick up tubes on a removeable cover that will allow me to service the pickup tubes and rework the tapped holes that hold the sending unit if I strip one. I can also use it as a clean out.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:43 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft