Best place to buy a T&T motor

gofastsandman · #1 10-07-2011, 11:04 AM

Hey Gang,
`96 rude 150/175 fast track system. Boy this is going to be fun. I`ve heard the horror stories of getting to the left rear screw to remove it. At least it happened in the driveway......off to surf.

Cheers,
GFS

FishStretcher · #2 10-07-2011, 08:35 PM

I rebuilt the one in my Yamaha. Soak it in liquid wrench for the day prior. Mine was just stuck brushes in the motor. A $0 fix. It too broke in the driveway. When I thought I needed a motor, Sierra was one of the cheaper replacement options.

gofastsandman · #3 10-07-2011, 09:32 PM

Thanks fish, but I am far from stuck brushes. Normally this requires the use of great heat.

Are any of the great minds here thinking that I could use a hot and cold cycle to help break the corrosion. I have been hitting it with the new Zep product. A master mechanic thought it better than PB and Aero Kroil. Not sure about that, but I will do my research. What about freon cooling to help break the corrosion?

Just fishin` here.

Cheers,
GFS

The OEM paint seems far better than the knock offs. Thoughts?

6buoys · #4 10-09-2011, 08:18 AM

do you know part number may have one most lickley an arco

gofastsandman · #5 10-09-2011, 10:14 AM

omc pn 0434495.
I found a NIB in Hollywood for 100 clams so I think I will go that route

Thanks,
and welcome to CSC.
GFS