Transom/composite foam, honeycomb panels

[shine]

We are now stocking transom composite material as well as pre-laminated honeycomb panels.

Transom boards are 3/4" thick, 26 lb density with fiberglass roving reinforcement.

General purpose FRP reinforced boards in 1/2" for decks, gunnels, stringers, etc.

http://http://www.gulfstreamcomposit...gory-s/136.htm



Fiberglass honeycomb panels are 25mm (bit over 1") and come pre-laminated with 17 oz of glass on each face. Ideal for decks/soles or frames.

http:// http://www.gulfstreamcomposi...gory-s/137.htm




Prices are better than anywhere else. Available for pickup or we can ship by freight.

Joel

[gofastsandman]

[QUOTE=shine;236806]We are now stocking transom composite material as well as pre-laminated honeycomb panels.

Transom boards are 3/4" thick, 26 lb density with fiberglass roving reinforcement.

General purpose FRP reinforced boards in 1/2" for decks, gunnels, stringers, etc.

http://http://www.gulfstreamcomposit...gory-s/136.htm



Fiberglass honeycomb panels are 25mm (bit over 1") and come pre-laminated with 17 oz of glass on each face. Ideal for decks/soles or frames.

http:// http://www.gulfstreamcomposi...gory-s/137.htm




Prices are better than anywhere else. Available for pickup or we can ship by freight.

Joel[/QUOTE
Hey Joel,
Congrats on the expansion of your line. I will be wanting some pre preg for a rear vertical panel. Non structural. 2`x7` maybe?

Cheers,
GFS

[shine]

Im sorry, but I dont have a good supplier for pre-pregs

[flyingfrizzle]

Is there a minimum order on the sheets of foam?

[shine]

No minimum order on core materials, but freight is the same for 1 or 10 sheets.

[flyingfrizzle]

Originally Posted by shine

No minimum order on core materials, but freight is the same for 1 or 10 sheets.

Cool, may try out some of this stuff. I will get with you for a shipping quote to 28562 business address with unloading means.

[shine]

Originally Posted by flyingfrizzle

Cool, may try out some of this stuff. I will get with you for a shipping quote to 28562 business address with unloading means.

Attachment 10604

$95 for up to 100 pounds

if over 100 pounds (more than a couple sheets) $175 if we need a liftgate on your end (if no forklift)

the honeycomb panels dont ad much weight at all

[flyingfrizzle]

Originally Posted by shine

$95 for up to 100 pounds

if over 100 pounds (more than a couple sheets) $175 if we need a liftgate on your end (if no forklift)

the honeycomb panels dont ad much weight at all

Sweet! That's a good rate on the shipping. We do have a fork lift so no issue there. We get 2-3 freight trucks here daily and there is always some one here to unload 24-7. Look forward to getting some soon