prop

[many scalps]

Howdy Gents, Looking for a merc. prop for a Yamaha ox66 150 hp. Need a 14.5 x 17 Black Diamond. Much Obliged , Very Respectfully, Fritz

[bobr338]

I have a yamaha 14.5x19 if that ends up being your right fit.

[many scalps]

Originally Posted by bobr338

I have a yamaha 14.5x19 if that ends up being your right fit.

Thank you Sir, Will keep that in mind. Keep your powder dry.

[McGillicuddy]

Many scalps,

I misspoke. I think the black diamond 17p is actually 15" diameter. QS1912.
Check ebay. They're about 100 bucks w/hub about 135 with hub new.
If you haven't yet tried, it might be worth trying to borrow one for a test run. It may be the most common prop in America so I would bet any prop shop or boat store has one on their wall..

[many scalps]

Originally Posted by McGillicuddy

Many scalps,

I misspoke. I think the black diamond 17p is actually 15" diameter. QS1912.
Check ebay. They're about 100 bucks w/hub about 135 with hub new.
If you haven't yet tried, it might be worth trying to borrow one for a test run. It may be the most common prop in America so I would bet any prop shop or boat store has one on their wall..

Morning, McGill, I am a bit thick headed. So I am looking for a 15x17 black diamond # qs1912 is that correct ? Thanks for your help. The best thing you can give someone is your time and I THANK YOU for YOURS . Very Respectfully, Fritz.

[Capt Terry]

many scalps-
I have a Merc Black Diamond aluminum 3B, 14.5" x 17"P prop that I ran on my Merc V-6 150 HP for about 10 years until I bought an ETEC 150HO. On the ETEC for best wakeboard speed control I am currently using a 5B High Five. The Merc prop has only been run in fresh water lakes and nearly perfect , though I might have spun the RBX-100 insert adapter during a hot hole shot the last time I used it. I'm in Greenville, SC if you care to try it. Where are you located?

[McGillicuddy]

There ya go...might just need to buy or borrow appropriate hub

[many scalps]

Originally Posted by Capt Terry

many scalps-
I have a Merc Black Diamond aluminum 3B, 14.5" x 17"P prop that I ran on my Merc V-6 150 HP for about 10 years until I bought an ETEC 150HO. On the ETEC for best wakeboard speed control I am currently using a 5B High Five. The Merc prop has only been run in fresh water lakes and nearly perfect , though I might have spun the RBX-100 insert adapter during a hot hole shot the last time I used it. I'm in Greenville, SC if you care to try it. Where are you located?

Capt. Terry, Sorry it took so long to get back to you . I am in Lancaster Co. Pa. Please let me know what you want wont for prop. Thanks, Very Respectfully, Fritz