|
|
#1
10-18-2016, 08:18 PM
|
|||
|
|||
my delay can be your gain....
Transaction number omn60603010811214
So as I'm working on my 74 Seacraft, plans inevitably change. ive now decided to convert it from an I/O to an outboard. so in the mean time I have purchased a smaller boat to keep me on the water. This means that I realistically wont have the seacraft in the water for quite some time. So with that being said I have some items available that I'm willing to part with. here they are: 1. lowrance hds 10 gen 2 with structure scan, new in box. only taken out for pics and dash fit. 2. gauges as seen in the pics 3. custom made seacraft switch panel with switches and ignition switch 4. I/o engine cover with cushion 5. mahogany dash/helm as seen in the pics 6. Navionics card for the lowrance since my plans are long term I just want to get these items to someone who could put them to use immediately and allow me to continue with my restoration. I'm open to all reasonable offers... all items are new and never installed or hooked up. and sorry, some pics are rotated 
|
|
#4
10-19-2016, 01:38 PM
|
|||
|
|||
|
The exterior measurements of the panel are 12" wide X 4" tall. The fuel switch was to switch between the main tank and the reserve tank...i was looking at the receipts last night and the switches alone totaled $116, if i remember correctly the panel itself was somewhere around 100. i also have a 12v outlet that could fit in the hole or the ignition switch. Here is a larger pic of the labels....if still interested let me know what you are willing to pay....
|
|
#9
10-25-2016, 12:16 PM
|
|||
|
|||
|
PM sent
|
 |
|
|
but that was his favorite spot!
Linear Mode
