Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-14-2004, 02:40 PM
Billsseacraft Billsseacraft is offline
Member
 
Join Date: Feb 2003
Location: tampa
Posts: 51
Default Cuddy to Center Console

Are there any inner liners around out there that can be found that you could use to convert a 23 Sceptre to a CC. I have seen people that have removed the windshields and added a center console but it just does not look right. I originally bought the cuddy boat because I had small kids but now that they are getting older I really want a CC and its gotta be a Seacraft. I was also considering going direct to Seacraft and see if they would sell just an inner liner. I have contacted them in the past and lets just say they did not really seem to care if I had an old Seacraft and certainly were no help. Any Suggestions.
Reply With Quote
  #2  
Old 04-15-2004, 09:40 PM
John R John R is offline
Senior Member
 
Join Date: Feb 2002
Location: Narragansett Bay
Posts: 1,374
Default Re: Cuddy to Center Console

There is a guy on the Cape hackin' a scepter into a CC. Many of the Septers (well, there really aren't many) you see with a small senter console and no windshield are actually Seacraft factory "Savage" models. And a nice concept too.

Seacraft has issues buolding new boats right now, doubty they'd sell you a liner that likely wouldn't fit anyway...
__________________
Surf and Boat fishing for
Striped Bass

http://striped-bass.com/images/sb_small180b.gif
Reply With Quote
  #3  
Old 04-15-2004, 10:08 PM
Bigshrimpin Bigshrimpin is offline
Senior Member
 
Join Date: Dec 2002
Location: Onset, MA
Posts: 2,712
Default Re: Cuddy to Center Console

Bill,
Why not sell your boat and buy a cc? If you're looking for the cheap way . . . that's it!! It's much less expensive and labor intensive than purchasing the liner, deck, and console from seacraft and then fitting them to your hull.

That being said if you have a friend with a 23 . . . you could pull a mold off the deck of your buddies 23 and try to make the liner, floor, and console yourself.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:47 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft