Bracket tub shape opinions - Page 3

SCSeacraft · #21 01-17-2007, 11:28 AM

I honestly don't know the specifics on it.
You will have to call Bobby.
He had it made for me and it wasn't as wide as the Armstrong so I had Mike at Wildfire order me a wide body.
May be worth a look.
Donnie

strick · #22 01-17-2007, 02:28 PM

I'm about 4.5 inches up from the keel. There is minimal spray coming from the anticav plate.I will check to see were the anticav plate sits in relation to the surface while running next time out.

strick

warthog5 · #23 01-17-2007, 11:03 PM

10-4

RUSTYNTABATHA · #24 01-30-2007, 06:57 PM

HEY WART IF YOU TAKE YOUR BRACKET OFF YOU GONNA SELL IT ?
RUSTY

warthog5 · #25 01-30-2007, 07:49 PM

Yes.

Old'sCool · #26 01-30-2007, 10:06 PM

I like the "no wrench" drain plug!!

strick · #27 01-30-2007, 11:58 PM

Quote:

I like the "no wrench" drain plug!!

I use a wrench anyway...I'm paranoid about that kind of stuff

strick

Old'sCool · #28 01-31-2007, 01:14 PM

I understand that!! Not to derail the thread but, how is the hole sealed at the garboard drain....for those that have replaced their own transoms?? Any pics of the install/repair??

strick · #29 02-01-2007, 12:41 AM

What I do is drill a hole to the right size first. Then I use epoxy to seal around the inside of the hole. Then one of these guys gets 5200 in place. I usually have to cut them to the right length then tap them in from the inside the boat so the drain plug fits into it as shown. The drain plug usually gets 5200 as well. Thats just how I do it.

strick

Old'sCool · #30 02-01-2007, 12:15 PM

That looks as right as it gets!! Nice job!