Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 09-23-2009, 02:59 PM
pl99 pl99 is offline
Senior Member
 
Join Date: Jul 2009
Location: Florida Native,Boynton
Posts: 125
Default Anchor box not draining... HELP PLEASE?

Ok I have Used a plunger, a snake, went to the car wash and shot water in drain hole... Rain a snake from under live well to as far as I could get It....
It has done this in the past but usually one of the above works...
Water was full of old debris at first and nasty.. Now its clear and still not draining.. I have checked for old posts and could not find anything... Thanks any help is appreciated and will take any one out fishing when macks start running/boat has rs lic. so 3500 lbs aday limit.. Just dont want to start cutting Which I am pretty sure I might.. Thank s yall Chris L hull is 73 CC 19 6
Reply With Quote
  #2  
Old 09-25-2009, 01:06 PM
MasterBaiter MasterBaiter is offline
Senior Member
 
Join Date: Sep 2008
Location: New Jersey
Posts: 229
Default Re: Anchor box not draining... HELP PLEASE?

I would try some air. Start with a lower pressure and work your way up. I'm guessing the line cannot be accessed so cracking it with 100psi would be a bad thing. You may just have a kink in it that some muck has clogged it. Where does it drain to? Maybe you could unclamp one of the ends and twist it, maybe whatever is causing the kink will hit a different spot on the hose.
Reply With Quote
  #3  
Old 09-26-2009, 12:07 AM
pl99 pl99 is offline
Senior Member
 
Join Date: Jul 2009
Location: Florida Native,Boynton
Posts: 125
Default Re: Anchor box not draining... HELP PLEASE?

Hey thanks, alredy fixed it. LOADED with sand seaweed and about a milllion other things.... Snaked it for three hours the other day till water ran clear..

LOADED WITH Crap.... Literally three hours till water ran threw clear in the hot fla sun..

Chris
Reply With Quote
  #4  
Old 10-11-2009, 03:34 PM
publius publius is offline
Junior Member
 
Join Date: Oct 2009
Posts: 1
Default Re: Anchor box not draining... HELP PLEASE?

I think I might plug the exit end and fill the drain pipe with something like Simple Green and an algaecide and let it sit for a day then pull the stopper and flush.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:47 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft