|
|
#21
03-03-2013, 02:19 PM
|
|||
|
|||
Thanks for the advice. I have spent the last several weeks reading information on doing this. I have done a few boats in the past but want to continue to learn and expand my knowledge. I have always used wood and would like to learn more about composites. I will try to find the book as well and learn what I can from it. I don't think I ever will know enough to stop reading and learning. Thanks for the help. I will start a thread on the rebuild once I get going and share my knowledge back as I go threw the process. Thanks for all the help, it is appreciated.
|
|
#22
03-03-2013, 02:44 PM
|
|||
|
|||
|
Quote:
Money well spent Dave
__________________
Blue Heron Boat Works Reinventing the wheel, one spoke at a time.
|
|
#24
03-03-2013, 07:31 PM
|
|||
|
|||
|
Thanks for the link, could not find a good book at the local book stores when I looked a month ago. I will get it ordered and read before I get started on my new projects. Just put a small deposit down on a local bare 1973 23' sf seacraft cc outboard hull yesterday and will be going to F.L. friday to get the other 27' seacraft project. Cant wait to get started on the 27' but still not sure if I should try to do the 23' at the same time or wait till Im done with the first one. I won't hurt for it to sit a while till I can do something with it. Dont see many sc hulls in N.C. as ya F.L. Guys so it was hard to pass on.
|
 |
|
|
Linear Mode
