Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #41  
Old 04-20-2014, 07:05 AM
beastley beastley is offline
Member
 
Join Date: Dec 2011
Location: South Jersey
Posts: 66
Default Scuppers

Kiwi, restore looks good! Curious on what your plans are for scuppers. From the last set of pics it appears you sealed the thru bottom scuppers and did not route out the transom.
Reply With Quote
  #42  
Old 04-20-2014, 08:49 AM
flyingfrizzle flyingfrizzle is offline
Senior Member
 
Join Date: Sep 2012
Location: Eastern NC
Posts: 1,653
Default

Lookin good! Your in the short rows now!
__________________
Current SeaCraft projects:
68 27' SeaCraft Race boat
71 20' SeaCraft CC sf
73 23' SeaCraft CC sf
74 20' SeaCraft Sceptre
74 20' SeaCraft CC sf
Reply With Quote
  #43  
Old 04-27-2014, 10:11 AM
kiwi kiwi is offline
Junior Member
 
Join Date: Aug 2005
Location: Jupiter, Florida
Posts: 25
Default

Beastley- I used the original thru deck drains. They were in good shape and I had no signs of leaks. The plan for this project was just to replace the transom. It was tough not to wonder, though.

FF- Couldn't have done it without you and this site. Just hung the motor yesterday. Rigging it today. The repair took a lot longer than I thought it would...I'm glad I took pictures of the rigging before removing the motor.
Reply With Quote
  #44  
Old 04-27-2014, 12:51 PM
flyingfrizzle flyingfrizzle is offline
Senior Member
 
Join Date: Sep 2012
Location: Eastern NC
Posts: 1,653
Default

Quote:
Originally Posted by kiwi View Post
FF- Couldn't have done it without you and this site. Just hung the motor yesterday. Rigging it today. The repair took a lot longer than I thought it would...I'm glad I took pictures of the rigging before removing the motor.
No problem, you can learn a lot from these old farts up here on csc sometimes.

Don't forget to post some pics when finished!
__________________
Current SeaCraft projects:
68 27' SeaCraft Race boat
71 20' SeaCraft CC sf
73 23' SeaCraft CC sf
74 20' SeaCraft Sceptre
74 20' SeaCraft CC sf
Reply With Quote
  #45  
Old 06-16-2014, 08:19 PM
kiwi kiwi is offline
Junior Member
 
Join Date: Aug 2005
Location: Jupiter, Florida
Posts: 25
Default

Sorry for not posting final pictures. Here's the finished product. Anyone have any clues on why my OB won't exceed 4000rpm? I'm using the same prop that used to push up to 5200 rpm, new gas (from a remote tank), new water separator filter and housing, drained the VST multiple times, fuel pump pressure is good. Also ran some Seafoam thru it, and have a tank full of new gas, also with Seafoam. I'm hoping that one day, a semi clogged injector will open up and she'll be good as new!

I haven't tried measuring pump pressure or timing at speed yet...

Anyway, thanks again to everyone for all of the great advice
Attached Images
 
Reply With Quote
  #46  
Old 06-16-2014, 08:27 PM
Blue_Heron Blue_Heron is offline
Senior Member
 
Join Date: Jan 2006
Location: Gator Country
Posts: 1,416
Default

Quote:
Originally Posted by kiwi View Post
...Anyone have any clues on why my OB won't exceed 4000rpm?
You might want to check for spark on all six cylinders. Could be an easy fix. If you've got good spark, and new plugs, and you're sure it's a fuel delivery problem, you want to fix it before a lean cylinder eats a piston.
Dave
__________________
Blue Heron Boat Works
Reinventing the wheel, one spoke at a time.
Reply With Quote
  #47  
Old 06-17-2014, 04:43 AM
Old'sCool Old'sCool is offline
Senior Member
 
Join Date: Jun 2006
Location: Charleston, SC
Posts: 2,122
Default

I sent my EFI injectors out this year to Bracko (sp) in NC for flow test, cleaning, ect. Best under $200 I spent, piece of mind and quick turnaround.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:58 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft