|
|
#1
07-10-2019, 08:30 PM
|
|||
|
|||
Replacing Side Mounted Rod Holders
Any suggestions on a manufacturer or DIY product to replace the factory wooden side mounted rod holders on a 23' CC? Any help/ideas appreciated.
|
|
#2
07-11-2019, 08:26 AM
|
||||
|
||||
|
I used the Taco Spring loaded type mounted to the ribs and Perko SS bendable pole hangers mounted on a piece of PVC board & painted forward for gaffs on one side & deck brush on the other. The 3/4" PVC board gets the forward holders out past the liner rib. Zoom in and you can see that the top holders had an additional piece of PCV to allow the 6' gaff to lay over the forward vent chase.
__________________
   1978 23' Superfish/Potter Bracket 250HP -------- as "Americans" you have the right to ...... "LIFE, LIBERTY and the PURSUIT of a Classic SeaCraft" -capt_chuck
|
|
#3
07-11-2019, 09:11 AM
|
|||
|
|||
|
Gucci!
__________________
1975 SF18/ 2002 DF140 1972 15' MonArk/ 1972 Merc 50 http://i833.photobucket.com/albums/z...photos/SC3.jpg
|
|
#4
07-11-2019, 12:05 PM
|
|||
|
|||
|
Thanks for the idea Capt. Looks really clean.
|
|
#5
07-11-2019, 06:02 PM
|
|||
|
|||
|
Hey Capt. Chuck, where did you find the trim along the bottom edge of your cap? I can't seem to find any?
|
|
#6
07-11-2019, 08:42 PM
|
||||
|
||||
|
Quote:
http://www.barbourcorp.com/rub-rail_rubrail.htmt It has an 1/8" lip which covers the rough combing edge. Comes Black or white I stretched it out between 2 trees, sanded and painted with Signature Finish using a 3" roller.
__________________
1978 23' Superfish/Potter Bracket 250HP -------- as "Americans" you have the right to ...... "LIFE, LIBERTY and the PURSUIT of a Classic SeaCraft" -capt_chuck
|
|
#7
07-12-2019, 09:24 AM
|
|||
|
|||
|
trim
Thanks!
|
|
#8
07-12-2019, 10:56 AM
|
|||
|
|||
|
|
 |
|
|
Linear Mode
