Ignition wire for for fuel gauge

Oldboat · #1 12-08-2019, 05:31 PM

Hello looking to put a fuel gauge in from my sender . I have tested gauge and it agrees perfectly with C10 gauge. I need to know what wire from my keys switch if any I can power gauge with so comes on with key. 2019 300 Suzuki .

Thx Keith

FLexpat · #2 12-08-2019, 05:56 PM

ABYC calls for purple

Oldboat · #3 12-08-2019, 06:13 PM

Thx for that will find it in morning. Keith

thehermit · #4 12-08-2019, 08:57 PM

Quote:

Originally Posted by FLexpat

ABYC calls for purple

Purple

NoBones · #5 12-08-2019, 09:35 PM

The wire from the sending unit should be "Pink" ...

Oldboat · #6 12-10-2019, 08:53 AM

I did not find a purple but I did find an unused black and grey that run togeather that have 12 volts after key is on. Since I?m not sure if it is safe to use I?m going to just power the gauge off the electronics switch just don?t want to take a chance on it. Thx

NoBones · #7 12-10-2019, 08:24 PM

Gray is normally for a Tach..

Oldboat · #8 12-10-2019, 09:03 PM

Yea I saw that I just added to electronic switch so I?m good thx again

gofastsandman · #9 12-11-2019, 08:26 PM

Quote:

Originally Posted by NoBones

Gray is normally for a Tach..

Grey is tach.
Purple is ignition hot side.
Pink is fuel send.

Wow, look at me.