Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-27-2020, 10:33 AM
Capt Terry Capt Terry is offline
Recovered
 
Join Date: Jan 2015
Posts: 573
Default Kmoose’s Engine Height

As usual Kmoose’s advice is sound and cuts to the chase- start high then go lower if need be. As Bushwacker remarked the dealers always seem to mount them too low.
It occurred to me after posting my AV plate video that my usage is on lakes, those of you in rougher stuff might need it lower. With my High Five 5b prop, I have no cavitation in tighter turns in testing than I would normally attempt. Once height is correct check your prop RPM at WOT. Dealer started with 21p, I am at 17p now.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:42 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft