Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #11  
Old 09-08-2022, 02:57 AM
Xcomunic8d Xcomunic8d is offline
Recovered
 
Join Date: Oct 2016
Posts: 320
Default

Never heard that and my guy has been Mia since covid. Must build and experiment

We sell blocks of ice in grocery stores here.., and I have an ice maker. Speaking of which I gotta go make some.
Reply With Quote
  #12  
Old 09-13-2022, 12:48 PM
kmoose kmoose is offline
Senior Member
 
Join Date: Jul 2006
Location: Ocala, Florida
Posts: 1,817
Default

Quote:
Originally Posted by 77SceptreOB View Post
Not sure on any of the specifics other than the .75 amp draw (9 watts). I haven't put a multimeter on it to confirm the power usage. Should be low enough not to kill a "starting" battery and certainly would work off a "house" deep cycle battery.



Sounds like a great idea,, but I've also heard that if you utilized that method it doesn't cool as well. The plastic surface of the bottle isn't cold enough since ice in the bottle(s) quickly get "insulated" with the warmer water that is in between the remaining ice in the bottle and the plastic shell of bottle. It lacks the intimate direct contact radiating from the cold block of ice. I'm sure it will work, and you get ice cold water to drink but in the long run I would think the unit doesn't work as well.
The plastic bottle does slow heat transfer but it is important to figure out the optimal rate heat is transferred into the ice to provide the desired control duration. It may pay to experiment with allowing the cooler and or bottles to drain as the melted liquid contains the transferred heat and also reduces the ice surface area that is exposed.

The whole process can be tweaked to achieve the best results and it’s cool to see you guys working through it with different ideas. Just keep in mind the first principle of thermodynamics…. Heat energy always moves/transfers from hot to cold. So the heat energy in the cabin is being transferred to the cooler. The rate and efficiency of the transfer can be improved with an increase in ambient pressure which the fan provides. Maybe an experiment can be done to reduce flow on the output duct to improve heat transfer in the box.
__________________
[b]The Moose is Loose !
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:00 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft