IF I HAD TO DO IT OVER AGAIN I WOULD

FELLOW-SHIP · #1 05-06-2003, 05:20 PM

Well I splashed my boat for the first time one year ago after spending lots of time (150 days) and lots of $$$ rebuilding my 23 CC and about this time in all project boat builders experience one would come to the place and say “If I had to do it all over again I would do this or that different” well I figured that the guys that are now starting or in the middle of their boat projects might be interested in our hind sights so I figured I would start this one off for the benefits of those who are starting their dream boats.
1. I would buy more beer not nearly enough beer went into my project.
2. I bought a loadmaster trailer if I had that one over again I would have bought the stainless steel disk brakes for it. I got everything else stainless but no one brought up stainless brakes I am not sure they were selling them then but I missed that one.
3. I would have gone with one of the new composite materials for the transom. When I did mine that decision was still a coin toss decision.
As for all the rest I would not do anything different. NOW YOU GUYS JUMP IN ON THIS ONE.
Fellow-ship [img]images/icons/wink.gif[/img]

Mark · #2 05-06-2003, 05:38 PM

Can you expand a bit on why you would go with a composite transom next time around? I assume you went with wood, are you already having troubles with it?

thanks/
mark

hermco · #3 05-06-2003, 07:50 PM

More beer? I never thought to add alcohol costs to my invoices! [img]images/icons/grin.gif[/img]

ocuyler · #4 05-06-2003, 10:02 PM

A lack of appropriate quantities of beer not only has severe consequences in rebuilding a SeaCraft, but it shows. There is nothing worse than being sober while doing this work.

Let's see, 150 days, what, maybe 3 beers minimum per session? Plus the 25 six packs your buddies drank. Oh, my, that's 25 CA-CA-CA-CASES.

You're my HERO

ltdan · #5 05-06-2003, 10:34 PM

WELL,WELL,WELL,,,,, I MAY NOT KNOW A DAMN THING ABOUT BOAT BUILDING/RESTORING,KEN. BUT EARLY ON IN MY PROJECT,I TOOK OUT ALL THE SHELVE'S IN MY GARAGE FRIDGE, AND STUCK IN A KEG OF MICHELOB LIGHT! BUT IT WAS THE WIFE THAT GAVE ME THE IDEA TO DRILL A HOLE IN THE DOOR AND RUN THE TAP THROUGH IT. HAD TO SPRING FOR A CO.2 SET UP TO PREASERISE THE KEG, BUT THE WIFE SAID,,,,AND I QUOTE "AT THE RATE YOUR GOING,THE HINGES WILL BREAK OFF BEFORE THE COOLER GIVE'S OUT" YOU'VE GOT TO LISTEN TO THAT KIND OF REASONING I SUPPOSE [img]images/icons/grin.gif[/img] ANYHOW I'M JUST GLAD TO KNOW THAT I'M DOING SOMETHING RIGHT,AND I HOPE EVERYONE ELSE WILL LEARN FROM YOUR MISTAKE [img]images/icons/wink.gif[/img] LIKE I'VE ALWAY'S SAID,,, THE BAIT'LL ROT,BEFORE I LET THE BEER GET WARM,,,,,, AS ALWAY'S LT DAN

TUGBOAT · #6 05-06-2003, 10:58 PM

Finally did sumpt'n right !!
1. GOT BEER !(This might be up to Briguy) Ha HA.I don't forget ! [img]images/icons/tongue.gif[/img]
2. Bought a Rolls trailer all allum w/ss. & SS disc brakes
3. Put 24# closed cell foam in the transom.
(got My fingers crossed on this one)
Scream'n Reels' [img]images/icons/cool.gif[/img]
"TUG"

Finster · #7 05-06-2003, 11:05 PM

I got a long way to go, I like that keg in the fridg thing. You think I'll save some time not having to squash cans? [img]images/icons/grin.gif[/img]

John R · #8 05-07-2003, 12:47 AM

DH - "More beer? I never thought to add alcohol costs to my invoices! " - that's the 5% line for incidental materials - people will even slide as waste disposal

Finster · #9 05-07-2003, 08:44 AM

Yo D.H, knock 5% off my invoice and I'll buy you a case. [img]images/icons/grin.gif[/img]

hermco · #10 05-07-2003, 09:34 AM

Lets see....item cost plus 5% for incidental materials/waste disposal...Hey Finster I will fax you an amended invoice! [img]images/icons/tongue.gif[/img]