|
|
#1
03-01-2008, 01:16 PM
|
|||
|
|||
Console door repair/Size to look for
Anyone know anyone that repairs or can build console doors. I'm going to do the teak re-finish you all have been talking about but my door is in pretty bad shape. As you can see it's held together with stainless things and I'm afraid it will fall apart when I start to work on it. Love to find some old wood worker trapped inside for the winter to fix it.
Any thoughts?  
__________________
70% of the earths surface is covered by water...It's going to be a very long day...Florida Marine Patrol. 
|
|
#2
03-01-2008, 02:04 PM
|
||||
|
||||
|
Re: Console door repair
Matt
I would go new. It appears too much juri-riggin to get back in shape. Put the size needed on the site. If not yourself many are going to the Dania Flea Market in a couple of weeks and can scout out new panals for you 
__________________
   1978 23' Superfish/Potter Bracket 250HP -------- as "Americans" you have the right to ...... "LIFE, LIBERTY and the PURSUIT of a Classic SeaCraft" -capt_chuck
|
|
#3
03-01-2008, 05:57 PM
|
|||
|
|||
|
Re: Console door repair
Here is the size of the door
21 7/8 high and 29 3/4 wide
__________________
70% of the earths surface is covered by water...It's going to be a very long day...Florida Marine Patrol.
|
|
#4
03-02-2008, 11:16 AM
|
|||
|
|||
|
Re: Console door repair
Whats the dates on the flea market maybe I'll run down.
__________________
70% of the earths surface is covered by water...It's going to be a very long day...Florida Marine Patrol.
|
|
#5
03-03-2008, 05:44 PM
|
||||
|
||||
|
Re: Console door repair
__________________
1978 23' Superfish/Potter Bracket 250HP -------- as "Americans" you have the right to ...... "LIFE, LIBERTY and the PURSUIT of a Classic SeaCraft" -capt_chuck
|
|
#6
03-03-2008, 06:47 PM
|
|||
|
|||
|
Re: Console door repair
try- www.thaiteakmarine.com- was going to have a new cabin door built for my tsunami last year but decided to re-build my orig. He has really nice stuff
__________________
1974 Tsunami- 2004 Merc 225 Opti on bracket
|
|
#7
03-04-2008, 06:46 PM
|
|||
|
|||
|
Re: Console door repair
This guy makes it look easy:
How to Make Louvered Doors & Window Shutters It looks like you could turn out some really nice doors after just a little bit of set up. You could also contact a local cabinet shop. Just make sure you let them know you want it out of teak. It's rough on bits and tools. Trey
__________________
Trey '64 13' AeroCraft, 15 Rude '74 23 SeaCraft, 225 Opti '84 18' Winner, 150 Merc The bitterness of poor quality lingers long after the sweetness of low cost.
|
|
#8
04-07-2008, 02:57 PM
|
|||
|
|||
|
Re: Console door repair
AFTER... used the teak slats from original doors and made a frame out of mahogany. Six coats of Epifanes.
__________________
70% of the earths surface is covered by water...It's going to be a very long day...Florida Marine Patrol.
|
|
#9
04-07-2008, 04:33 PM
|
|||
|
|||
|
Re: Console door repair
Nice salvage job, Wavelength. Like all the trademark wavelengths in the rails, too
 .
__________________
there's no such thing as normal anymore...
|
 |
|
|
Linear Mode
