need pressure gauge

simplerhotels · #1 05-09-2008, 07:05 PM

just bought a 1999 23' with the twin merc 150's and one of the pressure gauges has gone bad. Went thru a local Seacraft dealer who forwarded my hull number to tracker but they can't come up with anything and suggested I check this site. Any info out there on after market gauges? The gauge matches the others with Seacraft written in the gauge so I would like to find the same to keep the console looking neat and orderly. By the way I have an 1985 23' for sale if any interest. Thanks

NoBones · #2 05-09-2008, 10:06 PM

More then likely the 1/8 inch tube is clogged...
I just went to NAPA and purchased a gauge sending unit
kit for about $15.00. The OEM pressure gauge tube was clogged with salt residue. See if you can blow compressed
air through the line after disconnecting it from the engine
and gauge. If not buy a new tube kit.

See ya, Ken

Bryan A. · #3 05-09-2008, 10:26 PM

Quote:

Went thru a local Seacraft dealer who forwarded my hull number to tracker but they can't come up with anything and suggested I check this site.

Funny!!!! I guess classicseacraft.com is now the default for getting the tracker boats fixed now.