Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > SeaCraft Photos
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12-10-2008, 08:16 PM
zach zach is offline
Senior Member
 
Join Date: Aug 2007
Location: Atlanta / Ft. Lauderdale
Posts: 131
Default \"New\" 20 with a bracket

Well, after almost exactly one year, the little boat has been completed. This site has been a tremendous help for many of the decisions that had to be made. First off, I did none of the work, and all praise for the quality of work should be directed to Wildfire Marine in Stuart. The hull is a 1972 and I’ve owned it for about 3 years. After a trip to the keys in May of 07 and seeing a plethora of new spider cracks all over the deck and casting platform, I decided it was time to get the boat rebuilt. The deck/transom/cap was rotten (typical old Seacraft) and it was in need of a repower so I decided to take the plunge. I’m a huge fan of the 20 Seacraft and think its about the perfect hull for the south florida area, so instead of buying a new one, I figured I’d have my old one fit to my tastes.

We raised the deck and enclosed the transom. We installed a floatation bracket from Armstrong and added 12x12 lencos. We added a livewell in front of the console and one in the transom. We also reinforced the forward livewell in order to have it double as tank storage. The old 40 gallon fuel tank was replaced with a new 70 gallon (pushed as far forward as possible), mainly for those summer runs to the islands. Dual batteries and oil tank were placed under the console to counteract the bracket.

Rotten Balsa



Raising the stringers



Enclosing Transom





New deck (and transom livewell). The new deck was cured upside down with weights on top to make it curved, thus forcing water to filter to the sides.



Transom is filled in and hatches are built.





Console takes shape. The previous owner "restored" the boat before I bought it (obviously he did a horrible job) but the one nice part was he put in a new console. The console was from the factory and is the console they used on the 20's from 2000-present. I'm not 100% sure it is the same console used on today’s Seacraft 20, but its from the early 2000 era. To add the livewell and retain the lines of the console, Mike cut out the front and extended it.







Bracket and engine installed



Water line with nothing in the boat, marked by the bottom of the blue tape.



If you look closely, you can see the ball scupper above the water.



Dive rack in front of console. Also, forward console access to all wiring.



Final product

















Reply With Quote
  #2  
Old 12-10-2008, 08:25 PM
zach zach is offline
Senior Member
 
Join Date: Aug 2007
Location: Atlanta / Ft. Lauderdale
Posts: 131
Default Re: \"New\" 20 with a bracket

Also, while I'm hesitant to post "official" numbers, I will say that I saw 52 mph while only spinning 5350. That was with a Mirage Plus 21p. The motor should spin 6000. We will be raising it a hole or two and experimenting with different props. I'll let you know final numbers when we get them.
Reply With Quote
  #3  
Old 12-10-2008, 08:35 PM
CaptLloyd CaptLloyd is offline
Senior Member
 
Join Date: Dec 2002
Location: Satellite Beach, FL
Posts: 375
Default Re: \"New\" 20 with a bracket

Beautiful boat Zach!!

Congrats and Enjoy!!!

Oh, and hold on to your hat!

Lloyd
__________________
1973 Seacraft 20' SF "Sea Dog"
1988 Tracker/Seacraft 23' WA "Salty Dog"
Reply With Quote
  #4  
Old 12-10-2008, 10:20 PM
Fr. Frank Fr. Frank is offline
Senior Member
 
Join Date: Oct 2003
Location: Shalimar, Florida
Posts: 2,265
Default Re: \"New\" 20 with a bracket

Absolutely beautiful!
__________________
Common Sense is learning from your mistakes. Wisdom is learning from the other guy's mistakes.

Fr. Frank says:
Jesus liked fishing, too. He even walked on water to get to the boat!

Currently without a SeaCraft
(2) Pompano 12' fishing kayaks
'73 Cobia 18' prototype "Casting Skiff", 70hp Mercury
Reply With Quote
  #5  
Old 12-10-2008, 10:59 PM
Old'sCool Old'sCool is offline
Senior Member
 
Join Date: Jun 2006
Location: Charleston, SC
Posts: 2,122
Default Re: \"New\" 20 with a bracket

Very nice!!
Reply With Quote
  #6  
Old 12-11-2008, 10:07 AM
Billybob Billybob is offline
Senior Member
 
Join Date: Feb 2002
Location: watertown ct.
Posts: 377
Default Re: \"New\" 20 with a bracket

Thats beautiful Zach.
You're gonna have a lot of fun with that.
I gotta get me a 20'
Reply With Quote
  #7  
Old 12-11-2008, 04:56 PM
Mark Mark is offline
Senior Member
 
Join Date: May 2002
Location: 80304
Posts: 1,252
Default Re: \"New\" 20 with a bracket

Pretty boat, -Mike does good work.
Reply With Quote
  #8  
Old 12-11-2008, 08:14 PM
Blue197320 Blue197320 is offline
Senior Member
 
Join Date: Mar 2006
Location: Miami Fl
Posts: 947
Default Re: \"New\" 20 with a bracket

nice lookin restore! what color is that? i love the way it looks!
Reply With Quote
  #9  
Old 12-11-2008, 10:39 PM
zach zach is offline
Senior Member
 
Join Date: Aug 2007
Location: Atlanta / Ft. Lauderdale
Posts: 131
Default Re: \"New\" 20 with a bracket

I appreciate all the kind comments and want to again thank everyone who lent their wisdom throughout this process.

Lloyd, the bracket is great, totally changes the boat. Thanks for your help. Not going to lie, I was very nervous about the water line when putting the boat in the drink for the first time with the bracket. I was even more nervous about the boat porpoising when running. Thankfully, it is still self bailing and I experienced no porpoising in the 4 hours that I ran it (with no tabs). A hint of tabs are needed offshore, but when flat I can raise them with no ill effects.

Mark, if you are the same Mark with that pretty 20 in the photo section, then through you is how I found Mike. Beautiful boat, by the way.

Blue, color is ice blue. Boot stripe is a royal blue. Initially, I didn't want a boot stripe, but after looking at the hull for a month without it we decided to add one and I think it came out great.
Reply With Quote
  #10  
Old 12-11-2008, 11:01 PM
Blue197320 Blue197320 is offline
Senior Member
 
Join Date: Mar 2006
Location: Miami Fl
Posts: 947
Default Re: \"New\" 20 with a bracket

the more i look at it the more i see that it has things that i want to do to mine. do you have any other pics of the foredeck now that the gunnels are open? i prefer boats like that and thats exactly what i want to do to mine with the gunnels and keep the front that way. also no bracket either. before and after and maybe during if you have them would be great!!! not no big deal but if you do, then THANKS!
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:25 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft