Bow/Gunwale Rodholder for 20SF

workinpr0gress · #1 11-11-2009, 10:37 PM

Anyone have a pattern for the factory teak rodholders that are forward under the cap? Any help is much appreciated. Thanks BruceB

WillyC · #2 11-15-2009, 10:05 AM

Bruce,
I see you have a 1974sf. I think the patterns are slightly different for different years. I borrowed the teak rod holders from a friend who has a 71 or 72sf. They wouldn't fit in my 75sf. I just finished making my own rod holders. They are 3/4" plywood covered by two layers of glass. As of yesterday they are primmed and ready for paint. I can make you a template if you like and send them over to you. May not fit perfect but will likely be a good starting point. -will

workinpr0gress · #3 11-15-2009, 05:56 PM

that would be Great Will thanx ...Pm Me

Hookdude · #4 11-17-2009, 11:11 AM

The rodholders from my 74SF are currently out of the boat. I could trace them for you if you'd like.
If interested, send me a pm with your address.

Cheers,
Bob

workinpr0gress · #5 11-18-2009, 12:10 AM

Thanks for helping out guys.

SeaPlusPlus · #6 03-16-2010, 12:32 PM

Does anyone still have the patterns for this? I remade mine 2 years ago using Ipe (which was horrible to work with, some tough stuff!) and they didn't turn out just right, usable but still could be better. Remaking them now out of 3/4" Black Starboard and can't find my originals to use as a template. I have a 74' 20SF. Thanks!