New to me toys again. Stern vents.

[gofastsandman]

Thanks Richard!
I get to cut more holes in the boat. Now I have to move the bilge thru hulls.

Is slightly lower better? For the thru hulls that is.

One of my silent mistakes will now be covered. That`s why I have the starboard stern box on port. Fits, but not
properly.

Cheers,
GFS

[RWatts23]

Do go cutting just yet! I'll send them out Monday. I placed my bilge thru hull midway between the rubrail and the water line, I thought about lowering it, but I did'nt want to have to worry about water comming in while fishing, or running and pitching in rough seas. I did mount the thru hull for the live well low so that it would drain well- the thru hull for the live well is lower than the live well drain.

[eggsuckindog]

Question, why are putting vents on an outboard, just curious

[gofastsandman]

Dr Gucci said the 23s benefit from the vents and my deck will be happier.

GFS

[Snookerd]

Question, why are putting vents on an outboard, just curious

His diabolical plan will be mostly done then! Conversion to a Potter build 20SF. Sandy, the next step is to speed up the transom rot situation .

Seriously-Those vents with the correct ducting does help get air below deck.

[gofastsandman]

His diabolical plan will be mostly done then! Conversion to a Potter build 20SF. Sandy, the next step is to speed up the transom rot situation .

Seriously-Those vents with the correct ducting does help get air below deck.

Almost ready to PM Dr. Gucci for a couple of stickers.
CSC
Potter Built
by slackers `89.
It will be upside down in protest of slackers inability to use a jig for cutting my dash and console. I could go on, but I don`t want to let her see this. She reads all my posts.

I just moved the ducer and the holes were dry, dry, dry.
Resealed the transom cap w/ 5200 too. Maybe the #1 source of intrusion. Seal everything you can. Every screw you do is one more place you save. I don`t have a Pooh- Bah cave, and rain is my enemy.

What is the proper ducting?
Since I only have two.....one fore and one aft? Or just like the book says
Cheers,
GFS

[Spidercrab]

What is the proper ducting?
Since I only have two.....one fore and one aft?

mr gofast

u needs to put dem vents under the liftin strak under the tow eye..dat mean u gots to keep dat sucka ups on plain or U down to shake da hand of king neptune
he he
sam

[gofastsandman]

mr gofast

u needs to put dem vents under the liftin strak under the tow eye..dat mean u gots to keep dat sucka ups on plain or U down to shake da hand of king neptune
he he
sam

You can fish with us anytime Sam.

Cheers,
GFS