sceptre parts wanted

floorboy · #1 01-05-2011, 03:15 AM

Does anybody have the ladder mounts for the side of the boat or a ladder or junk ladder laying around? I broke the right stringer after a freak accident and the ladder proves pretty handy for the old guys I take with me on occasion.

Also I have a hole in the front deck of my boat directly behind the windlass. I got a bracket (threaded rod) that the owner used to lift it off the trailer. It attaches to the bow eye in the anchor locker. Anyway I have a hole in the boat now and the threaded rod just falls into the hole. Is there a plug or something to cover the hole when the rod is not in there?? I could make something to cover it but after the oem look. it appears to be a factory hole.

abl1111 · #2 01-05-2011, 10:51 AM

DAMN ! Just a month or so ago, I threw away all my ladder parts ( I had two OEM, foldable ladders that broke in various places ). I had them sitting for years. I removed the teak treads and out they went !

Someone on the site actually made me a replacment ladder out of wood that is PERFECT. It is the nicest replacement I have ever seen.

I had the same hole in the bow - I removed the threaded rod and taped the hole from below - then layed in a fiberglass paste (DuraGlass) and gelcoat - the top is not cosmetically finished the way it should be ( non skid ) - but it's water tight and solid.

77SceptreOB · #3 01-05-2011, 11:06 AM

Quote:

Does anybody have the ladder mounts for the side of the boat...?

Your in luck! I have 4 OEM mounts (2 pairs). You are welcome to them for free! I was saving them, because they are unique. My DA brother "threw the ladder away" years ago because he said he never used it....gees. Anyway your welcome to them. PM me your address and I'll put them in the mail.

floorboy · #4 01-05-2011, 11:13 AM

Cool on the brackets I will send you a p.m.

Figures, I am always too late on the ladder parts.

Ya remember who made the ladder, or do you have some pics of it??

McGillicuddy · #5 01-05-2011, 01:33 PM

I remember your posts on a replacement but not sure I saw the resulting ladder...
Could you post a couple of pics or direct me to a link? Thanks. - Gillie