Cape Codder 19 and Cape Codder 24... seacrafts?

[KenB]

I know cape cod 26 (later albin 26) is basically an extended 23.

From the pics I found online, these looks suspiciously seacraft-y, but no direct shots of transom.

Someone put the molds for both up on craigslist.

http://boston.craigslist.org/sob/boa/2284819531.html

All molds needed to build the famous Cape Codder 19. Two hull molds, top deck mold , liner mold, several console molds, either side battery box molds, all patterns for transom and stringers and even a started boat.
Sacrifice price of $15,000. Cape codder 24`mold and deck also available , $ 15,000.

[Blackfin26]

The cape codder 19 and 24 are not "seacraft" type molds. Different hulls but very well respected. I've ridden on a 24 with a 6.2 merc and bravo 3 and it's a beast!

[Bigshrimpin]

romarine 19 is a 19 cape codder knock off.

[kerneltugboat]

The Cape Codder and Cape Cod Marine are two different animals, but both great boats. I was told the Cape Cod Marine 26 was a splashed 23 Seacraft hull stretched in the middle and I believe the tunnel was copied from a proline. They also tweaked the cap up a bit to give it a little more freeboard since the floor was a little higher for the jack-shaft, that is why the hull sides have a flat up at the gunnels. Thats the rumor I heard anyway.

[hammer slammer]

The Cape cod marine is a 23' that is stretched there is no question about it. It is a friend of a friends boat that was used to create the new plug.
They are a incredible boat for there size, by the way I was fishing beside 2 of them on Georges bank 150 miles offshore this year!

[McGillicuddy]

Five year old post from tht so I hope I don't p.o. messr. moderator.

Real nice views of the Cape Cod 26 by Albin...Now that appears to be leading to an indictment of offshore steroid use on a Seacraft 23 hull

http://www.thehulltruth.com/boating-...-pictures.html

[Capt Chuck]

I remember something about Albin getting the mold from Silverhawk. Maybe not?
Hey ScottM you might have some comments on this one

[strick]

http://www.casdvm.com/photos/26albin/

They wanted 140K plus for one at the local marina several years ago. Don't think it ever sold.

strick

[Bigshrimpin]

The cape codder 19 and 24 are not "seacraft" type molds. Different hulls but very well respected. I've ridden on a 24 with a 6.2 merc and bravo 3 and it's a beast!

Strick . . . I remember that boat in the delta!! Tuna season is sneaking up very soon . . . we don't have to watch the weather as closely this year

Ken - 26 Albin/Capemarine is an awesome boat (23+3) . . . Just not the same hull as a 24 cape codder as Kernel and Black said above. With all the used boats on the market . . . It's going to be a hard business selling new hulls($4 gas and high unemployment too).

This is the 19 cape codder knock off . . .
http://www.romarineboats.com/customp...pg=20FTConsole



This was the best idea with a Tuna Door!!

[Blackfin26]

Big, Nice shot of the winch to lift the console and work on the diesel! I've only ridden in a 24 Silverhawk/23 Seacraft. Have to imagine the Cape Cod 26/Albins are that much better. Not surprised they were on G. Bank for the tuna bite.