|
|
#1
06-29-2013, 03:21 PM
|
|||
|
|||
what size prop for a 20' sf
I have a 1988 20' seacraft sf with a 150 merc and a quicksilver 48-16312-a5-15pitch (14" dia)prop. I am repowering to a 200 merc efi, any thoughts on what size prop to use. I'm concerned about over revving with the existing prop.
|
|
#2
06-29-2013, 08:41 PM
|
|||
|
|||
|
I installed a 2001 merc 200
Propgods recomended a quicksilver 151/2 x 17p seems to be good I seeing 5600 rpm wot
|
|
#4
06-30-2013, 01:50 PM
|
|||
|
|||
|
Quicksilver QS5011X Thunderbolt, equivalent is Merc Mirage+
__________________
there's no such thing as normal anymore...
|
|
#5
06-30-2013, 08:20 PM
|
|||
|
|||
|
ken at propgods said the quicksilver is the same as a mirage and recommended me saving some money perhaps vecause I was a forum member and found him on THT
|
|
#6
07-10-2013, 04:31 PM
|
|||
|
|||
|
2001 20' Master Angler with a 200 OX66
I have a 2001 20' Master Angler (25" transom) that I just repowered with a like new 200 OX66. I am running a 19P Laser II turning 5400 rpms WOT at reliable 52 -53 mph on my Garmin - about 4% prop slip.
I have tried 5 different props and that's as dialed in as I have found for my rig. Propgods is a great resource.
|
|
#7
07-30-2013, 12:14 AM
|
|||
|
|||
|
The Lazer is what No Bones has and it apparently works well - I have a 19" Stilletto, I would recommend a 17 though but I can't imagine a prop working any better across the board. In spite of my protests I don't think Ken handles Stilltto's yet. I don't think the Mirage+ with the large diameter works as well on a 20 as they do on 23's.
__________________
Any way you measure it - dumbass is expensive
|
 |
|
|
Linear Mode
