1978 SeaCraft Master Angler 20' cc Potter Built Project hull -For Sale-

[flyingfrizzle]

$25 Pay-Pal Unique Transaction ID # 4UR45115NY957764U

Selling my 1978 SeaCraft Master Angler 20' cc Potter Built Project hull,

It is in really nice condition for its age. There is no bottom paint on the hull. The paint is in nice condition and was not sprayed to long ago it appears. It dose need cleaning. The Transom was changed out a year ago and was done with west system epoxy and high grade marine ply wood 2 layers with 1708 glass between. It needs to be finished and the cap was recorded as well. They used meranti marine wood for this and it is bedded down but still needs the top glassed over then faired and finished. The floor is out and needs to be glassed back in. It is a good start with much of the work done already. I did not do the work myself but this is how it was when I bought it. The last owner never finished it. The hull its self seems true and straight. The paint dose not show ripples or any damaged spots on the outer sides. The lay up on it is very thick and it is the thickest of all 8 of my SeaCraft hulls I have had. I'm guessing it's so thick due to the construction of the ma hull with no liner that this model designed with the 3 piece construction. I don't have time to finish it so I decided to let it go to some one with more time. I would like to concentrate on the other few SeaCraft hulls I have already started. I am starting the price at $800 and am open to reasonable offers. I do have a trailer if needed to pull the hull if you don't have one already. One aluminum and one galvanized both dual axel and also a third single axel that is a cheaper option. All are in good shape but may need tires soon due to age of the rubber. Trailers are $400-$800 depending on the one picked. This would be a real nice project for someone to pick up cheap and it will make a real nice boat. The MA model has the extra high cap with more freeboard and more toe room inside of the hull than the standard SF model. Plus they are more rare and harder to find. Located In New Bern NC 28562 PM or Call me @ (252) 229-6644 for questions or if you would like to purchase.

[fat2nawilly]

hey mike,I thought we had a deal going on this thing? im just waiting for your measurement on the freeboard?

[jorgeinmiami]

I have a nice center console for someone that picks up this project

[flyingfrizzle]

Originally Posted by fat2nawilly

hey mike,I thought we had a deal going on this thing? im just waiting for your measurement on the freeboard?

Sorry forgot to get the mesurment, I will try and get it asap. We have had bad rain storms & tornadoes but I will try to run out there with a tape. If you are still interested you can get first shot at it, I thought you lost interest but I guess I dropped the ball.

[gofastsandman]

Originally Posted by flyingfrizzle

Sorry forgot to get the mesurment, I will try and get it asap. We have had bad rain storms & tornadoes but I will try to run out there with a tape. If you are still interested you can get first shot at it, I thought you lost interest but I guess I dropped the ball.

Step back. Breathe.

Let it go. Gather. Enjoy. Explain the high side.
Cheers,
GFS

[flyingfrizzle]

$25 Pay-Pal Unique Transaction ID # 4UR45115NY957764U

[fat2nawilly]

yes im still interested and will most likely take it off your hands. I just wanna compare the free board height to my v-20 and a 20' dusky i have.

[flyingfrizzle]

Freeboard is as following measured from the floor to top of gunnel:

Rear of hull- 24"

Center of hull- 27"

Front of hull behind casting platform 28"

Front of hull if deck is flat w/o casting platform 30"

I has a lot more height than the super fish model cc and plenty of room'
to raise the floor if that was wanted.

[fat2nawilly]

thanks mike, Ill take it consider it sold.

[cbboatworks]

Mike thanks for taking the time and telling me about the hull, i will be there to pick it up later next week, thanks