Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-25-2014, 10:29 PM
bobfish21 bobfish21 is offline
Member
 
Join Date: Jan 2003
Location: long island,ny
Posts: 42
Default Garmin b150m Tilt thruhull transducer for 23 tsunami

Upgrading the electronics on my 23 tsunami to garmin 741xs with b150m tilt thruhull chirp xducer; install will be to stbd of center line in the deepest deadrise section of the hull. Anyone know the deadrise angle for this section, and what angle unit I need to order?
Thanks,
Bob
Reply With Quote
  #2  
Old 05-26-2014, 07:43 AM
FLexpat FLexpat is offline
Recovered
 
Join Date: Jan 2014
Posts: 669
Default

The inner panel is 20 degrees at the transom. It slowly gets steeper as you go forward but not much until you are about 8'-10' forward of the transom; I THINK it is about 21-22 degrees there. I would use a 20 degree transducer for anything aft of midship.
Reply With Quote
  #3  
Old 05-27-2014, 08:46 AM
kmoose kmoose is offline
Senior Member
 
Join Date: Jul 2006
Location: Ocala, Florida
Posts: 1,817
Default

On my Tsunami I have a huge tilted 20 degree (SS263N) in the lowest starboard area and it works spectacular. I will note when I only have 20 or so gallons left in my tank I lose signal at 40 knots in a light chop but it has never acted up in any other condition
Attached Images
 
__________________
[b]The Moose is Loose !
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:40 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft