23' drop in ice/storage tray replacements

[FAS]

looking for a pair of drop in ice storage trays for the two aft ,top deck hatches,on a 85 23' center console.originals or replacements are fine .Anyone remake these?

[gofastsandman]

I also need one for my 20. Port side.

Did the scepters have the same ones? If so I may be of help.

[FAS]

I don't know if scepters were the same..I am kinda new to the SeaCraft game. I could make a mold and repro them out of fiberglass,any other interest out there??

[FAS]

Nobody knows this?seems to be a pretty common part to be missing on a classic...I will need two, anyone else ?

[evansb]

I have two out of a 1986 cc 23ft they are roughly 12 x 12 in good condition they are located in east central fla just sold ttop and console to another member also have tall bow rail and livewell,also center floor section that runs under cc and leaning post

[Livetosea]

I have a 1984 23'CC and would be interested also.

[Capt Chuck]

Originally Posted by FAS

Nobody knows this?seems to be a pretty common part to be missing on a classic...I will need two, anyone else ?

These drop in baskets were NOT part of the tooling on Potter built hulls.

[FAS]

Capt Chuck, thank you for that information..I guess that, those who would like them, will have to look on '80 and newer 23 Sea Crafts.would that be correct?

[FAS]

Originally Posted by evansb

I have two out of a 1986 cc 23ft they are roughly 12 x 12 in good condition they are located in east central fla just sold ttop and console to another member also have tall bow rail and livewell,also center floor section that runs under cc and leaning post

sent you a PM,missed your last message, sorry.

[Capt Chuck]

Originally Posted by FAS

Capt Chuck, thank you for that information..I guess that, those who would like them, will have to look on '80 and newer 23 Sea Crafts.would that be correct?

I really have not studied what went on with different SeaCraft models after 1981. Maybe the 20's had the inserts also? The major upside was different hulls were being built by different companies. They all had their ideas and made changes to the molds. The consistency of the Potter builts was lost.
I know some later hulls (I don't remember the year nor the company) were some of the 23's were produced with old / retired molds that had a "hook" on the inside step port side

Maybe some of the older members remember?