Prop

[Oldboat]

Looking to see if any one has my exact setup and what prop and performance.
1973 SC CC 300 Suzuki 30 inch shaft on wide Armstrong bracket. I have a LFS4R18 that Ken prop gods sent me (great guy) that s still not right and ken suggested a wedge might help. The boat is better but still get some porposing with different conditions. Around 3200 Rpm falls of plain .4500 at around 30 MPH. 5900 around 42 to 44. I do run the boat heavy most of the time.
I no moose has great success with his bravo I 22 inch but can said Suzuki’s don’t do well with them most of the time. Thx Keith

[DonV]

Do you have trim tabs?

[Oldboat]

Yes 12x12 lenco that I have made bigger did help

[Oldboat]

I had my boat at international and mike also recommended Wedge that he installed and he put a 18 1/2 suzuki prop and my seacraft ride is back could not be happier. We were out today yesterday and it was crappy out but no problem at all. Snapper and black fin bite on fire

[KNZ911]

Glad to hear you got it sorted. Did you ever find a supplier for the bow rail mounts?

[Oldboat]

No not yet I need to find the hardware and get it done have needed it Lately for anchoring on rough days to bottom fish