Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-23-2021, 07:14 PM
ricknewman ricknewman is offline
Senior Member
 
Join Date: Jun 2009
Location: Eastern Shore, Va
Posts: 164
Default New paint job

I'm in the process of getting my '78 23'cc painted. One of the prospective painters doesn't want to do the bottom saying that the awlgrip won't hold up on the bottom due to the friction from the water. The other painter says that its no problem. The boat stays either on the trailer or on the lift. Which of these guys is right? I've already bought the awlgrip so thats what he's using.
Reply With Quote
  #2  
Old 05-23-2021, 08:25 PM
Old'sCool Old'sCool is offline
Senior Member
 
Join Date: Jun 2006
Location: Charleston, SC
Posts: 2,122
Default

Mine's been great for 10 years. Awlgrip is NOT supposed to be left in the water as blisters may occur.
Reply With Quote
  #3  
Old 05-24-2021, 08:19 AM
Kwaugh5p Kwaugh5p is offline
Recovered
 
Join Date: May 2018
Posts: 69
Default

I was told by my painter that alwgrip can only stay in the water for a couple of days than it will blister. I am choosing bottom paint as I will sometimes leave my boat in for almost a week sometimes.
Reply With Quote
  #4  
Old 05-24-2021, 09:50 AM
strick strick is offline
Senior Member
 
Join Date: Aug 2003
Location: California
Posts: 2,738
Default

I have left a boat in the water for up to 10 days with no problem on awlgrip bottom.

strick
__________________
"I always wanted to piss in the Rhine" (General George Patton upon entering Germany)
Reply With Quote
  #5  
Old 05-24-2021, 11:57 AM
DonV DonV is offline
Senior Member
 
Join Date: Jul 2004
Location: Apollo Beach or Islamorada
Posts: 3,488
Send a message via ICQ to DonV
Default

The biggest problem here in Florida is algae growth on the bottom before you have to worry about blisters. I have the Signature paint on my transom and it's never blistered, however in the warm Florida water it never stays more than 5, 6 or maybe 7 days anyway. As far as the friction of the water hurting it, I don't think so. That paint is very hard and slick. If you are worried, have the bottom gel coated and the sides pained the color you want.
Reply With Quote
  #6  
Old 05-24-2021, 08:54 PM
ricknewman ricknewman is offline
Senior Member
 
Join Date: Jun 2009
Location: Eastern Shore, Va
Posts: 164
Default

I'm going with it. I had one of my previous Seacrafts completely awlgriped and had no bottom issues but I sold the boat after just a couple years and didn't get to see how it held up.
Reply With Quote
  #7  
Old 05-28-2021, 03:24 AM
AyeSpy AyeSpy is offline
Recovered
 
Join Date: May 2021
Posts: 19
Default

Awlgrip...As I'm sure you know, the faster the current of the tide, the more growth you will have. I've never heard of the paint blistering, but then again, I haven't heard of Gelcoat having that problem either. This is just what I was told when I was in the US Navy, but it was said that there was hot pepper powder in the bottom paint to keep growth and barnacles from growing on the hull. Just what I was told...

Chris.
Reply With Quote
  #8  
Old 05-28-2021, 07:34 PM
ricknewman ricknewman is offline
Senior Member
 
Join Date: Jun 2009
Location: Eastern Shore, Va
Posts: 164
Default

Just got her back from the shop and am pleased with the results. Now I've got to get busy putting her back together. It doesnt look like the weather is going to cooperate for the holiday weekend anyway.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:55 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft